Welcome Customer !

Membership

Zhejiang Saikong Electrical Technology Co., Ltd.
Free Member ·1YRS
,
Other

Main Products: 变频器

Xwboo>Technical Article>How to set the inverter parameters?

Zhejiang Saikong Electrical Technology Co., Ltd.Free·1YRS

  • E-mail

    amy@safeinvert.com

  • Phone

  • Address

    #22 Liujiang Avenue, Liushi Town, Yueqing City, Zhejiang Province, China

Contact Now
How to set the inverter parameters?
Date: 2022/11/4Read: 34

How to set the inverter parameters?

May 28, 2021

How to set the inverter parameters?

The parameter setting of the frequency converter is very important in the debugging process. Many users who use the inverter for the first time, because they don't fully understand the meaning of these parameters, and there are more setting parameters listed, how to set many parameters of the inverter? This is a headache. For these users, they need to master the basic knowledge of inverter parameter setting: which parameters need to be set before trial operation; which parameters need to be adjusted during operation and the appropriate range of adjustment; how to prevent frequency conversion due to improper parameter settings during commissioning Damage to the device, etc.

1. "Restore factory settings": Before restoring the factory settings, you must first power on, and then perform a restore to the factory settings, in order to prevent the inverter from having some previously set parameters (of course, this problem does not exist if it is a brand new inverter) ;


2. "Set motor type": whether the motor is an asynchronous motor or a synchronous motor, of course, it is generally an asynchronous motor, and the default is also an asynchronous motor;


3. "Set the motor parameters according to the motor nameplate": just refer to the motor nameplate on the motor body.


4. "Jog operation to confirm whether the direction of rotation of the motor is correct": During this operation, be sure to pay attention to whether there is any interference or collision with the load carried by the motor when the motor is running. During the start of the operation, use the low-speed running test. can;

5. "Set the inverter to self-learning mode": Some inverters do not support the self-learning mode, and the operating parameters of this type of inverter need to be set one by one. Of course, most of the inverters on the market currently support self-learning, which greatly liberates our industrial controllers from complicated parameters;


6. "Start learning for motor matching operation": Same as the previous jog operation, you must pay attention to whether the load can run in forward and reverse directions. At the same time, it should be noted that in the self-learning mode, the motor will rotate quickly, so be careful


7. "After running, set the running command channel": Through self-learning, you can quickly set the inverter running parameters. At the same time, it also needs to be manually set, the control command source channel of the inverter operation, such as IO terminal, analog port, network communication, etc.;


Generally, the inverter supports these control command channels:


Start and stop (IO terminal) + frequency (internal setting)


Start and stop (IO terminal) + frequency (analog port)


Start and stop (IO terminal) + frequency (network communication)


Start and stop (network communication) + frequency (internal setting)


Start and stop (network communication) + frequency (network communication)


Start and stop (network communication) + frequency (analog port)



Have you got the parameter settings of the inverter?

The above inverter debugging configuration process is very necessary for the stable operation of the inverter. Especially in the self-learning process, the inverter automatically matches an optimal operating process parameter according to the load and other conditions through this process, which can realize the rapid start of the motor and avoid the problem of poor parameter matching during the later operation. All kinds of problems brought by.