-
E-mail
amy@safeinvert.com
- Phone
-
Address
#22 Liujiang Avenue, Liushi Town, Yueqing City, Zhejiang Province, China
Membership
Help
Zhejiang Saikong Electrical Technology Co., Ltd.Free·1YRS
amy@safeinvert.com
#22 Liujiang Avenue, Liushi Town, Yueqing City, Zhejiang Province, China
Is the inverter placed for too long a problem? 5 tips to teach you how to maintain the inverter!
In the process of inverter maintenance, we often encounter the situation that the inverter is damaged due to too long storage time. Although this sounds very incredible, it is indeed a frequent occurrence. If the inverter is damaged and repaired due to improper maintenance of the inverter, it will really waste manpower and financial resources, which will also have a great impact on the company's operations.
Usually, if the inverter is placed for more than half a year before use, due to factors such as the placement environment, the service life of the inverter, the load rate and other factors, the probability of damage is relatively high. Generally, the following problems will occur:
1. The inverter sends power, the front-stage circuit breaker trips, and the inverter blows up;
2. There is no display on the panel when the inverter is powered on;
3. The inverter can be powered, but it fails after running;
4. The inverter can be powered, but it will blow up after running.
In addition, some inverters in life can still be used normally after being placed for a period of time. This phenomenon is actually quite common, mainly because:
1. The inverter storage environment is better;
2. The inverter has not been working for a long time under overheating or overloading working conditions;
3. The service life of the frequency converter is relatively short;
4. The internal capacitance characteristics of the inverter are better.
So when we can't use the inverter, how should we place it in order to maintain the inverter? Let's take a look together below:
1. Place the inverter in the packing box when storing;
2. It is best to place it in a dry place without sunlight, dust and dust;
3. The ambient temperature of the storage location is best within the range of -20 to 40 degrees;
4. The relative humidity of the storage location is preferably within the range of 20% to 90%, and there is no condensation;
5. The inverter should be stored in an environment containing corrosive gas and liquid for a long time.
Last Article: In the bearing mode, the inverter has protection failure, how to correct
Next Article: How to set the inverter parameters?