Fork type pneumatic actuator
Fork type pneumatic actuator, is a piston type actuator, suitable for 90° Angle valves (such as ball valve, butterfly valve, plug valve) switch cutting or metering control.G series pneumatic actuators, usually referred to as the "single cylinder double piston - variable torque fork type" pneumatic actuators.
Fork type pneumatic actuator is a kind of angular stroke actuator, suitable for 90° Angle valve (such as ball valve, butterfly valve, plug valve) switch cutting or metering control.
Fork type pneumatic actuator can be divided into two types: double action and single action.Single acting actuator can be divided into normally open (FO) and normally closed (FC).Customers can choose different actuators according to different working conditions.
Fork type pneumatic actuator, with large torque output, and affordable, with high performance, long life, safe and reliable, energy saving and environmental protection characteristics;
It is mainly used for Angle stroke switch and adjustment with ball valve, butterfly valve, plug valve and so on.
The working principle of G series actuators: compressed air enters the cylinder and pushes the shifting fork to move. The shifting fork turns the straight motion of the piston into rotary motion and outputs the torque through the output shaft, so as to realize the Angle control of the valve switch.The output torque of the shifting fork actuator changes with the Angle, reaching the maximum value at the opening and closing points, which is completely consistent with the characteristics of the maximum torque required for the opening and closing of butterfly valves and ball valves. It can really play the role of the actuator, ensure the performance of the valve and extend the service life of the valve.
Technical Features:
Air source pressure: 3~12bar
Air source: air, nitrogen, natural gas (explosion-proof type only)
Torque: Maximum output torque: 250000Nm.
Standard operating temperature: -20℃ to +80℃.
High temperature type: -20℃ to +160℃ (provided on request).
Low temperature type: -40℃ to +80℃ (provided on request).
The connection standard of the actuator is ISO 5211, and the fixed way of matching accessories with the connector is according to VDI/VDE3845 NAMUR.