At pneumatic actuator is divided into double acting type and single acting type.
Double acting working principle
When the air source pressure enters the middle cavity between the two pistons of the cylinder from the air port, the two pistons are separated and moved towards the two ends of the cylinder, and the air in the air chambers at both ends is discharged through the air port, at the same time, the two piston racks are synchronously driven to rotate the output shaft (gear) anticlockwise. On the contrary, when the air source pressure enters the air chambers at both ends of the cylinder from the air port, the two pistons move towards the middle of the cylinder, and the air in the middle of the air chamber is discharged through the air port. At the same time, the two piston racks synchronously drive the output shaft to rotate clockwise.
Working principle of single action
When the air source pressure enters the middle cavity between the two pistons of the cylinder from the air port, the separation of the two pistons moves towards both ends of the cylinder, forcing the springs at both ends to compress, and the air in the air chambers at both ends is discharged through the air port, at the same time, the rack of the two pistons synchronously drives the output shaft to rotate counterclockwise. When the air supply pressure is reversed by the solenoid valve, the two pistons of the cylinder move towards the middle direction under the spring force, and the air in the middle air chamber is discharged from the air port, and the two piston racks synchronously drive the output shaft to rotate clockwise.