SC90M Peripheral Pump

Application Field

• This series of pumps are used to pump clean water,It can be used for domestic water supply, high-pressure system, auxiliary equipment, high-pressure and low-pressure pipeline water supply, garden irrigation system Garden, greenhouse and greenhouse, automatic water supply

• Small tanks using automatic control devices (control relays, pressure controllers).

• Equipment shall be installed at protected locations

• Not affected by atmosphere and moisture.

Pump Parts

• Pump body: cast iron

• Impeller: Brass/Stainless steel/P.P.O

• Motor shaft: Carbon steel/ Stainless steel

Motor

• Motor type: asynchronous, enclosed, air type Cooling system with built-in thermal protection

• Bearings: rolling (c&u)

• Stator winding: Copper/Aluminum

• Voltage: 110-240V

• Frequency: 50Hz-60Hz

• Insulation class: B/F

• Protection grade: IP44/IP54

Service Conditions

• Maximum Ambient temperature: +40 ° C

• Maximum temperature of pumped liquid: +60 ° C

• Maximum pump chamber pressure: 8 bar

• Maximum suction height: up to 8M

• Only for clean water without abrasive (sand, clay, lime, etc.)

      Hydrogen index of water (PH): 6.5-8.5

1. Pump Body

2. Impeller

3. Mechanical Seal

4. Motor Bracket

5. Ball Bearing

6. Shaft and Rotor

7. Motor Case

8. End Cover

9. Fan

10. Fan cover

11. Capacitor

12. Terminal cover

Technicla Data

Overall and Mounting Dimension

Structure Diagram

Packaging Diagram