JS Series Stainless Steel Self-priming Pump

Scope of Application

• This series of pumps is designed to pump pure water,

• Can be used for domestic water supply and lifting system High pressure, auxiliary equipment, lift water in high and low pressure pipelines, garden irrigation system and Garden, greenhouse and greenhouse, automatic water supply.

• Small tanks using automatic control devices (control relays, pressure controllers).

• Equipment shall be installed at protected locations

• Not affected by atmosphere and moisture.

Pump Parts

• Pump body: Stainless steel

• Impeller: Brass/Stainless steel/P.P.O

• Motor shaft: Carbon steel/ Stainless steel

Motor

• Motor type: asynchronous, enclosed, air type Cooling system with built-in thermal protection

• Bearings: rolling (c&u)

• Stator winding: Copper/Aluminum

• Voltage: 110V-240V

• Frequency: 50Hz-60Hz

• Insulation class: F

• Protection grade: IPx4

Service Conditions

• Maximum Ambient temperature: +40 ° C

• Maximum temperature of pumped liquid: +60 ° C

• Maximum pump chamber pressure: 8 bar

• Maximum suction height: up to 8M

• Only for clean water without abrasive (sand, clay, lime, etc.)

      Hydrogen index of water (PH): 6.5-8.5

1. Plug

2. O-Ring

3. Pump body

4. Screw

5. O-Ring

6. Plug

7. O-Ring

8. Rubber foot

9. Ejector

10. O-Ring

11. Diffuser

12. Nut

13. Impeller

14. Snap ring

15. O-ring

16. Rolling mechanical seal

17. Fixed mechanical seal

18. Stainless steel casing cover

19. Drop guard

20. Front cover

21. Bearing

22. Key

23. Rotor

24. Motor housing with stator

25. Support foot

26. Wave-form washer

27. Tie-rod

28. End cover

29. Fan

30. Fan cover

31. Terminal box base

32. Screw

33. Terminal block

34. Capacitor

35. Terminal box cover

36. Screw

37. Terminal box nut

38. Fairlead

39. Cable holder

40. Screw

41. Screw

Technicla Data

Overall and Mounting Dimension

Structure Diagram

Packaging Diagram