MH Series Multi-stage Water Pump

Application Field

• This series of pumps are used to pump clean water ,It can be used for domestic water supply, high-pressure system, auxiliary equipment, high-pressure and low-pressure pipeline water supply, garden irrigation system Garden, greenhouse and greenhouse, automatic water supply

• Small tanks using automatic control devices (control relays, pressure controllers).

• Equipment shall be installed at protected locations

• Not affected by atmosphere and moisture.

Pump Parts

• Pump body: cast iron

• Impeller: Brass/Stainless steel/P.P.O

• Motor shaft: Carbon steel/ Stainless steel

Motor

• Motor type: asynchronous, enclosed, air type Cooling system with built-in thermal protection

• Bearings: rolling (c&u)

• Stator winding: Copper/Aluminum

• Voltage: 110V-240V

• Frequency: 50Hz-60Hz

• Insulation class: B/F

• Protection grade: IP44/IP54

Service Conditions

• Maximum Ambient temperature: +40 ° C

• Maximum temperature of pumped liquid: +60 ° C

• Maximum pump chamber pressure: 8 bar

• Maximum suction height: up to 8M

• Only for clean water without abrasive (sand, clay, lime, etc.)

      Hydrogen index of water (PH): 6.5-8.5

1. Plug

2. Gasket

3. Pump body

4. O-Ring

5. Tie-rod

6. Self-priming valve

7. Nut

8. Gasket

9. Impeller

10. Diffuser

11. Partition

12. Pump casing

13. Snap ring

14. Polling mechanical seal

15. Fixed mechanical seal

16. O-Ring

17. Front cover

18. Bearing

19. Rotor

20. Motor housing wirh stator

21. Support foot

22. Wave-form washer

23. Tie-rod

24. End cover

25. Fan

26. Fan cover

27. Terminal box base

28. Terminal block

29. Screw

30. Capacitor

31. Terminal box cover

32. Screw

33. Terminal box nut

34. Fairlead

35. Cable holder

36. Screw

37. screw

Technicla Data

Overall and Mounting Dimension

Structure Diagram

Packaging Diagram