-
E-mail
Juliet.zhu@talentcnc.com
- Phone
-
Address
Room 1210, Fanhua Center Mansion A, 4555 Renmin Road, Xiangcheng District, Suzhou, China
Membership
Help
Suzhou Talent Import and Export Co., Ltd.Free·1YRS
Juliet.zhu@talentcnc.com
Room 1210, Fanhua Center Mansion A, 4555 Renmin Road, Xiangcheng District, Suzhou, China
Characteristics of TAT-400S high accuracy cnc wire cut precision edm machine
1. The host machine adopts high-quality 250 resin sand, which is tempered for many times to eliminate internal stress and keep the accuracy of the machine tool unchanged for a long time.
2. Two way constant tension wire tightening structure, no manual wire tightening is required for long-time processing, so that the accuracy and surface quality of the processed workpiece are strongly guaranteed.
3. The screw barrel motion bearing adopts fully imported precision bearing, with longer service life. The guide wheel adopts special high-precision guide wheel and fully imported bearing, which greatly increases the service life.
4. The filter device of slow wire water tank, professional water-based cutting fluid and multi-layer filtration system are adopted. The self-priming water pump has better performance and longer service life, which lays a foundation for the high precision and roughness of the machined surface.
5. The one-stop automatic centralized oil supply device can lubricate the X and Y guide rails, screw rods, screw barrel guide rails and screw rods to ensure the service life of the machine tool.
6. The system is a complete set of wire cutting solutions. Autocut system is composed of autocut system software, motion control card based on PCI bus, high reliability, servo drive control motherboard, AC high-frequency discharge board and sampling circuit. Autocut system software includes AutoCAD WEDM module, nccad (including WEDM module), autocut plug-in of CAXA and machine tool control software.
High life moving parts for TAT-400S high accuracy cnc wire cut precision edm machine
1. X, Y and Z axes adopt high-precision ball screw and imported rolling linear guide rail, which can run stably and maintain the accuracy of the machine tool for a long time.
2. All moving bearings of the machine tool are imported bearings, so as to improve the reliability and durability of the machining accuracy of the machine tool and ensure the long-term interests of customers.
3. The wire guide nozzle adopts the design scheme of slow wire walking, the UV axis is fixed, and the wire guide nozzle can rise and fall automatically to make it close to the workpiece processing surface to the greatest extent, prevent the molybdenum wire from shaking again, avoid the line mark on the cutting surface, and greatly improve the accuracy and roughness of the processing surface.
4. The tightening system adopts bidirectional automatic tightening device to control the tightening of molybdenum wire in real time. The unevenness and plane accuracy of the machining plane caused by improper tightness of molybdenum wire in the machining process are completely solved.
5. The guide wheel adopts specially made gem guide wheel and customized water spray plate. Re replacement can automatically return to the original point, which greatly reduces the difficulty of replacing vulnerable parts and facilitates the use of customers.
6. The guide rail of the wire drum adopts the fully imported linear guide rail, and the reversing switch adopts the imported switch to ensure the stability, high precision and long-term reliability of the wire drum at high and low speed.
Picture description of TAT-400S high accuracy cnc wire cut precision edm machine

Technical Parameter
| Equipment type | Unit | TAT-400S |
Fuselage | Host Size (Length *Width *Height) | mm | 1700*1300*2160 |
Total weight |
| 1500 | |
Workbench | Workbench size (width x length) | mm | 740*460 |
Travel | X-axis travel | mm | 320 |
Y-axis travel | mm | 400 | |
Z-axis travel | mm | 300 | |
CNC Power Supply | Pulse width | us | 1-250 |
Wire speed |
| 0-3 | |
Cutting number | time | 1-7 | |
Mini Mechanical Driving Equivalent | um | 1 | |
Pulse Resolution | um | 0.4 | |
Processing capacity | Spindle stroke (electrically adjustable) | mm | 250 |
Max.cutting slope/workpiece thickness |
| 6°~30°/80mm | |
Max. Bearing Capacity of Workbench | kg | 300 | |
Machining accuracy | Location accuracy X/Y | mm | ≤0.01 |
Repeated positioning accuracy X/Y | mm | ≤0.005 | |
Multi-tool Cutting Accuracy | mm | ≤0.005( 40mm,Cut one and repairtwo.MaterialSKD11orCr12,HRC58) | |
Optimum Surface Roughness | um | Ra≤1.0(MaterialSKD11 or Cr12,HRC58) | |
| Maximum cutting efficiency | mm²∕min | ≥220 |
Common cutting efficiency | mm²∕min | ≥140 | |
Max. Processing Current | A | ≥6-8 | |
Processing efficiency | No-load Voltage of Machining Power Supply | V | 100 |
| Power consumption | KW | ≤2.3 |
Wire traveling system | Electrode wire diameter | mm | ∮0.12-∮0.2 |
| Wire barrel traveling speed |
| Frequency control |
| Tightening method |
| Two-way automatic tightening |
| Wire travelling speed | m/s | 3-12 |
Working groove | Filtration accuracy | um | <10 |
| Filtration mode |
| Slow-Walking Filtration |
| Working fluid |
| Special cutting fluid |
Environment and electricity | Electric power |
| 380V±10% / 50/60Hz / 2kVA |
| Temperature |
| T15-30℃ / humidity40-80% |
| Pressure | kpa | 86-106kpa |