Welcome Customer !

Membership

Suzhou Talent Import and Export Co., Ltd.
Free Member ·1YRS
,
Other

Main Products: 切线机

Xwboo>Products
Product Categories

Suzhou Talent Import and Export Co., Ltd.Free·1YRS

  • E-mail

    Juliet.zhu@talentcnc.com

  • Phone

  • Address

    Room 1210, Fanhua Center Mansion A, 4555 Renmin Road, Xiangcheng District, Suzhou, China

Contact Now

DK7725 wire cut edm machine

Model
Nature of the Manufacturer
Other
Product Category
Place of Origin
City, Province
Overview
Wire cut edm machine is a set of machine tool electrical appliances, high frequency power supply, servo control and graphics programming as one, to achieve high efficiency, high precision, high finish, simple processing control, greatly improve the processing level of high speed wire cutting machine. Flexible commutation with frequency converter is adopted in machine tool commutation, which can arbitrarily adjust the speed of wire conveyor drum, thereby improving the smoothness of workpiece.
Product Details

Working principle of DK7725 wire cut edm machine 


Using the moving fine metal wire (copper wire or molybdenum wire) as electrode, the workpiece is formed by pulse spark discharge cutting. The fine molybdenum wire is used as the tool electrode for cutting, the wire storage cylinder makes the molybdenum wire move forward and backward alternately, and the processing energy is supplied by the pulse power supply. The working liquid medium is poured between the electrode wire and the workpiece, and the worktable moves servo feed according to the spark gap state in the two coordinate directions of the horizontal plane according to the predetermined control program, so as to synthesize various curve tracks and cut the workpiece.



Main features of DK7725 wire cut edm machine


1. Wire cutting has no obvious mechanical cutting trace. It can be processed perfectly regardless of the hardness and stiffness of the processed materials, but it can not process non-metallic conductive materials.

2. The slit produced by wire cutting is narrow and the amount of metal erosion is relatively small, which is conducive to the reuse of processed materials.

3. It can process small hole materials and machining parts with complex shapes, but it can not process blind holes.

4. In the process of WEDM, there may be deformation or cracks on the surface of the workpiece, so heat treatment and rough machining should be carried out properly before WEDM, so as to improve the accuracy of WEDM by consuming the performance of processing materials and blank shape defects.

5. Wire cutting technology has low loss of electrode wire and high machining precision.

6. When machining too thick machining materials by wire cutting, it will make it difficult for the working fluid to enter and fill the gap of discharge, which will affect the machining accuracy or cause the surface roughness of machining materials.

7. WEDM can be processed by NC programming technology, and its processing parameters can be accurately adjusted to realize full-automatic processing.




Pictures of DK7725 wire cut edm machine



                                        DK7725 wire cut edm machine.jpg


Techical Parameter


S/NProjectParameter
1ModelDK7725
2Electrical cabinet formVertical cabinet (full step type)
3GuideSteel rail
4Lead screw formBall screw
5XYUV motion motor formReactive stepping motor
6Working mode of wire conveying motorFrequency converter speed regulation1~12m/s
7Machine tool protectionEnvironmental protection cover
8Resolution of motion axis0.001mm
9Table size620X400
10X, Y axial stroke250X350mm
11U, V axis travel±35×±35mm(±60×±60m)
12Machining taper / machining thickness0°
13Maximum straight cutting thickness300mm(Z-axis manual lifting)
14control mode4 axis linkage
15Maximum load capacity160 kg
16Maximum processing current8A
17Maximum machining efficiencyCr12,H=60mm≥180 mm²/m,Aluminum cutting≥220 mm²/m
18Surface roughness(Straight line cutting,H≤40mm)Ra≤2.0μm
19Cutting accuracyCr12,H=40mm≤0.01mm
20Radial runout of wire storage cylinder≤0.02mm
21Molybdenum wire diameter range0.12~0.22mm
22Wire storage capacity of wire storage cylinder250m
23Loss of molybdenum wireCr12,H=40mm≤0.02mm
24Cutting power supplyHigh frequency power supply system without resistance resistance
25Operating systemWindows XP
26Control systemAUTOCUT
27Operating systemWindows XP
28Control systemAUTOCUT
29Communication interfaceLAN、RS232、USB
30Operation functionDrawing or CAD (DXF) drawing import
31Volume of working tank55L
32Working fluid filtration modeFilter screen filtration
33Weight of whole machine1200 kg
34Overall dimension of main engine1350x1150x1600mm 
35Cabinet size730×630×1820mm
36Rated power of electric appliance≤ 2.7kW