-
E-mail
Juliet.zhu@talentcnc.com
- Phone
-
Address
Room 1210, Fanhua Center Mansion A, 4555 Renmin Road, Xiangcheng District, Suzhou, China
Membership
Help
Suzhou Talent Import and Export Co., Ltd.Free·1YRS
Juliet.zhu@talentcnc.com
Room 1210, Fanhua Center Mansion A, 4555 Renmin Road, Xiangcheng District, Suzhou, China
Introduction to TAT-800S good precision cnc wire cut edm machine
What about medium wire cutting? The so-called medium wire walking WEDM is the common name of medium wire walking WEDM (ms-wedm). It realizes multiple cutting functions on high-speed reciprocating WEDM. "Middle wire walking" can be used to process complex cavities and curved surfaces of various conductors, such as precision parts, molds, electrodes, cemented carbide, quenched steel, structural steel, titanium alloy and diamond.
Working principle of medium wire cutting: the electrode wire wound on the wire conveying cylinder moves at a certain speed along the rotation direction of the wire conveying cylinder, and the workpiece installed on the machine tool workbench moves relative to the electrode wire according to the predetermined control track. One pole of the pulse power supply is connected to the workpiece and the other pole is connected to the electrode wire. A certain discharge gap is always maintained between the workpiece and the electrode wire, and the working fluid is sprayed. The spark discharge between the electrodes erodes a certain gap, and the workpiece with the required shape and size is cut out by continuous pulse discharge.
Scope of application of TAT-800S good precision cnc wire cut edm machine in
WEDM has opened up a new process for new product trial production, precision parts processing and mold manufacturing, which is mainly applicable to the following aspects.
(1) Machining die
It is suitable for processing stamping dies of various shapes. By adjusting different clearance compensation, punch, punch fixing plate, die and discharge plate can be cut with only one programming. The die fit clearance and machining accuracy can usually meet the requirements. In addition, it can also process extrusion dies, powder metallurgy dies, bending dies, plastic dies and other dies with taper.
(2) Electrode for machining EDM
The electrode for general perforation processing, the electrode for cavity processing with taper, and electrode materials such as copper tungsten and silver tungsten alloys are especially economical for medium wire cutting. At the same time, they are also suitable for processing electrodes with fine and complex shapes.
(3) Machining parts
During the trial production of new products, the parts are directly cut on the blank by medium wire cutting. For example, the trial production and cutting of silicon steel stator and rotor cores of special micro motors can greatly shorten the manufacturing cycle and reduce the cost because there is no need to manufacture separate molds. In addition, it is convenient to modify the design and change the processing program. When processing thin parts, multiple pieces can be stacked together. In terms of parts manufacturing, it can be used to process parts with a large variety and small quantity, parts of special difficult to process materials, material test samples, various holes, special gear cams, templates and forming tools. At the same time, it can also carry out micro machining, special-shaped groove and narrow slot machining of manual standard defects.
Picture of TAT-800S good precision cnc wire cut edm machine

Technical Parameter
| Equipment type | Unit | TAT-800S |
Fuselage | Host Size (Length *Width *Height) | mm | 2410*2060*2250 |
Total weight |
| 3800 | |
Workbench | Workbench size (width x length) | mm | 1180*750 |
Travel | X-axis travel | mm | 630 |
Y-axis travel | mm | 800 | |
Z-axis travel | mm | 300 | |
CNC Power Supply | Pulse width | us | 1-250 |
Wire speed |
| 0-3 | |
Cutting number | time | 1-7 | |
Mini Mechanical Driving Equivalent | um | 1 | |
Pulse Resolution | um | 0.1 | |
Processing capacity | Spindle stroke (electrically adjustable) | mm | 250 |
Max.cutting slope/workpiece thickness |
| 6°~30°/80mm | |
Max. Bearing Capacity of Workbench | kg | 1200 | |
Machining accuracy | Location accuracy X/Y | mm | ≤0.01 |
Repeated positioning accuracy X/Y | mm | ≤0.005 | |
Multi-tool Cutting Accuracy | mm | ≤0.005( 40mm,Cut one and repair two.MaterialSKD11orCr12,HRC58) | |
Optimum Surface Roughness | um | Ra≤1.0(MaterialSKD11 or Cr12,HRC58) | |
| Maximum cutting efficiency | mm²∕min | ≥220 |
Common cutting efficiency | mm²∕min | ≥140 | |
Max. Processing Current | A | ≥6-8 | |
Processing efficiency | No-load Voltage of Machining Power Supply | V | 100 |
| Power consumption | KW | ≤2.3 |
Wire traveling system | Electrode wire diameter | mm | ∮0.12-∮0.2 |
| Wire barrel traveling speed |
| frequency control |
| Tightening method |
| Two-way automatic tightening |
| Wire travelling speed | m/s | 3-12 |
Working groove | Filtration accuracy | um | <10 |
| Filtration mode |
| Slow-Walking Filtration |
| Working fluid |
| Special cutting fluid |
Environment and electricity | Electric power |
| 380V±10% / 50/60Hz / 2kVA |
| Temperature |
| T15-30℃ / humidity40-80% |
| Pressure | kpa | 86-106kpa |