-
E-mail
Juliet.zhu@talentcnc.com
- Phone
-
Address
Room 1210, Fanhua Center Mansion A, 4555 Renmin Road, Xiangcheng District, Suzhou, China
Membership
Help
Suzhou Talent Import and Export Co., Ltd.Free·1YRS
Juliet.zhu@talentcnc.com
Room 1210, Fanhua Center Mansion A, 4555 Renmin Road, Xiangcheng District, Suzhou, China
Characteristics of machine tool for TAT-630 edm cnc wire cut machine
1. The host machine adopts high-quality 250 resin sand, which is tempered for many times to eliminate internal stress and keep the accuracy of the machine tool unchanged for a long time.
2. Two way constant tension wire tightening structure, no manual wire tightening is required for long-time processing, so that the accuracy and surface quality of the processed workpiece are strongly guaranteed.
3. The screw barrel motion bearing adopts fully imported precision bearing with longer service life. The guide wheel adopts special high-precision guide wheel and fully imported bearing, which greatly increases the service life.
4. The filter device of slow wire walking water tank, special water-based cutting fluid and multi-layer filtration system are adopted. The self-priming water pump has better performance and longer service life, which lays a foundation for the high precision and roughness of the machined surface.
5. The one-stop automatic centralized oil supply device can lubricate the X and Y guide rails, screw rods, screw barrel guide rails and screw rods to ensure the service life of the machine tool.
6. Autocut system is composed of autocut system software, motion control card based on PCI bus, high reliability, stepping drive control motherboard, AC high-frequency discharge board and sampling circuit. Autocut system software includes AutoCAD WEDM module, nccad (including WEDM module), autocut plug-in of CAXA and machine tool control software.
Advantages of TAT-630 edm cnc wire cut machine
1.The medium WEDM machine tool has the function of multiple cutting. During processing, the control system will automatically adjust the processing parameters (high-frequency pulse width, pulse interval, number of power tubes and threading speed) according to the prepared program, and can also manually change the processing parameters and make appropriate adjustment at the same time.
2.The medium wire cutting machine tool has the processing mode of "three retreats and two retreats". This processing mode is the processing mode used by most medium wire cutting machines in the market. The principle of this processing mode is that the wire is automatically reversed after three seconds to ensure that the molybdenum wire moves forward gradually.
3.The medium wire cutting machine tool has the processing mode of unilateral discharge. The unilateral discharge processing process is: the molybdenum wire is discharged in one direction and does not discharge after reverse. This processing mode is better than the parts processed by three retreats and two retreats, because it is only discharged in one direction and will not cause traces of molybdenum wire.
Detail drawing of TAT-630 edm cnc wire cut machine
Technical Parameter
Equipment type | Unit | TAT-630 | |
Fuselage | Host Size (Length*Width*Height) | mm | 2120*1760*2250 |
Total weight | kg | 3200 | |
Workbench | Workbench size (width*length) | mm | 1020*640 |
Travel | X-axis travel | mm | 500 |
Y-axis travel | mm | 630 | |
Z-axis travel | mm | 300 | |
CNC PowerSupply | Pulse width | us | 1-250 |
Wire speed | 0-3 | ||
Cutting number | time | 1-7 | |
Mini Mechanical Driving Equivalent | um | 1 | |
Pulse Resolution | um | 0.4 | |
Processing capacity | Spindle stroke (electrically adjustable) | mm | 250 |
Max.cutting slope/workpiece thickness | 6°~30°/80mm | ||
Max. Bearing Capacity of Workbench | kg | 800 | |
Machining accuracy | Location accuracy X/Y | mm | ≤0.01 |
Repeated positioning accuracy X/Y | mm | ≤0.005 | |
Multi-tool Cutting Accuracy | mm | ≤0.005( 40mm,Cut one and repair two.Material SKD11orCr12,HRC58) | |
Optimum Surface Roughness | um | Ra≤1.0(Material SKD11 or Cr12,HRC58) | |
Maximum cutting efficiency | mm²∕min | ≥220 | |
Common cutting efficiency | mm²∕min | ≥140 | |
Max. Processing Current | A | ≥6-8 | |
Processing efficiency | No-load Voltage of Machining Power Supply | V | 100 |
Power consumption | kw | ≤2.3 | |
Wire traveling system | Electrode wire diameter | mm | ∮0.12-∮0.2 |
Wire barrel traveling speed | frequency control | ||
Tightening method | Two-way automatic tightening | ||
Wire travelling speed | m/s | 3-12 | |
Working groove | Filtration accuracy | um | <10 |
Filtration mode | Slow-Walking Filtration | ||
Working fluid | Special cutting fluid | ||
Environment and electricity | Electric power | 380V±10% / 50/60Hz / 2kVA | |
Temperature | T15-30℃ / humidity 40-80% | ||
Pressure | 86-106kpa |