Welcome Customer !

Membership

Suzhou Talent Import and Export Co., Ltd.
Free Member ·1YRS
,
Other

Main Products: 切线机

Xwboo>Products
Product Categories

Suzhou Talent Import and Export Co., Ltd.Free·1YRS

  • E-mail

    Juliet.zhu@talentcnc.com

  • Phone

  • Address

    Room 1210, Fanhua Center Mansion A, 4555 Renmin Road, Xiangcheng District, Suzhou, China

Contact Now

DK77100 wire electrical discharge wire edm machine

Model
Nature of the Manufacturer
Other
Product Category
Place of Origin
City, Province
Overview
Wire electrical discharge wire edm machine integrates machine tool electrical appliances, high-frequency power supply, servo control and graphic programming, realizes high efficiency, high precision, high finish and simple processing control, and greatly improves the processing level of high-speed wire cutting machine tool. The machine tool adopts flexible commutation with frequency converter, which can arbitrarily adjust the speed of wire feeding drum and improve the flatness of workpiece.
Product Details

Machining principle of DK77100 wire electrical discharge wire edm machine


Wire electrical discharge wire edm machine is processed by connecting the electrode wire to the negative pole of the pulse power supply, and the workpiece to the positive pole of the pulse power supply. After the high-frequency pulse power supply is powered on, when the distance between the workpiece and the electrode wire is less than the discharge distance, the pulse power can ionize and puncture the medium (working fluid) to form a discharge channel.

Under the action of electric field force, a large number of negatively charged electrons rush to the positive electrode at high speed, and positively charged ions rush to the negative electrode. The high temperature generated by ionization melts and even gasifies the workpiece surface, so that the metal is thrown out with the movement of electrode wire and the impact of working fluid, thus forming pits on the workpiece surface.

In the high temperature zone, due to the polarity effect, the energy distributed between the electrode wire and the workpiece is different, so the surface temperature of the electrode wire and the workpiece is also different. Moreover, because the melting temperature of the electrode wire is much higher than that of the workpiece material, and the electrode wire leaves the high temperature zone at high speed, the amount of electrode erosion in the high temperature zone is much less than that of the workpiece, This makes the workpiece surface form large pits.

A small pit is formed on the surface of the electrode wire. Because the machining process is continuous, the stepping motor is controlled and attacked continuously to maintain the necessary gap between the electrode wire and the workpiece for discharge, so the workpiece is gradually cut out a gap.




Detail drawing of  DK77100 wire electrical discharge wire edm machine


 


                                            DK77100 wire electrical discharge wire edm machine.jpg


Techical Parameter


S/N

Project

Parameters

1

Model

DK77100

2

Electrical cabinet form

Stepping type of vertical cabinet

3

Guide

V flat guide rail

4

Lead screw form

Ball screw

5

XY motion motor form

Stepper motor

6

Working mode of wire conveying motor

Frequency converter speed regulation 1 ~ 12m / S

7

Machine tool protection

Environmental protection cover

8

Resolution of motion axis

0.001mm

9

Table size

1150X1600

10

X. Y axial stroke

1000X1200mm

11

U. V-axis stroke

±35×±35mm

12

Machining taper / machining thickness

±6°/80mm

13

Maximum straight cutting thickness

1100mm(Z-axis electric lifting)

14

Control mode

4 axis linkage

15

Maximum load capacity

1500kg

16

Maximum processing current

8A

17

Maximum processing efficiency Cr12, H = 60mm

≥180 mm²/m

18

Surface roughness (straight cutting, H ≤ 40mm)

Ra≤2.5μm

19

Cutting accuracy Cr12, H = 40mm

≤0.015mm

20

Radial runout of wire storage cylinder

≤0.02mm

21

Molybdenum wire diameter range

0.12~0.22mm

22

Wire storage capacity of wire storage cylinder

250m

23

Molybdenum wire loss Cr12, H = 40mm

≤0.02mm /300000mm²,

24

Cutting power supply

High frequency power supply system without resistance

25

Operating system

Windows 98/XP(According to the control software)

26

Control system

StandardAUTOCUT

27

Communication interface

LAN、RS232、USB

28

Operation function

Drawing or CAD drawing import

29

Working tank volume

55L

30

Working fluid filtration mode

Filter screen filtration

31

Weight of whole machine

6000 kg

32

Overall dimension of main engine

2500x2300x2500mm

33

Cabinet size

730×630×1820mm

34

Rated power of electric appliance

≤ 2.7kW