Welcome Customer !

Membership

Suzhou Talent Import and Export Co., Ltd.
Free Member ·1YRS
,
Other

Main Products: 切线机

Xwboo>Products
Product Categories

Suzhou Talent Import and Export Co., Ltd.Free·1YRS

  • E-mail

    Juliet.zhu@talentcnc.com

  • Phone

  • Address

    Room 1210, Fanhua Center Mansion A, 4555 Renmin Road, Xiangcheng District, Suzhou, China

Contact Now

ZNC540 Die Sinking Mould EDM

Model
Nature of the Manufacturer
Other
Product Category
Place of Origin
City, Province
Overview
Die sinker machine is mainly used for the processing of precision die, cavity mold (such as plastic bag, bakelite mold, presser shaft mold, etc.), small holes and special-shaped holes. It is an ideal processing equipment for machining workshops and mold workshops. The Z-axis adopts Panasonic motor imported from Japan with AC servo drive controlThe fuselage adopts HT250 which has gone through artificial aging and other various treatments.
Product Details

Principle of ZNC540 Die Sinking Mould EDM


During EDM, the tool electrode and the workpiece are respectively connected to the two poles of the pulse power supply and immersed in the working fluid, or the working fluid is charged into the discharge gap. The automatic gap control system controls the tool electrode to feed to the workpiece. When the gap between the two electrodes reaches a certain distance, the pulse voltage applied on the two electrodes will break down the working fluid and produce spark discharge.
A large amount of heat energy is instantaneously concentrated in the micro channel of discharge, the temperature can be up to more than 10000 ℃, and the pressure also changes sharply, so that a small amount of metal materials on the working surface immediately melt and gasify, and explosively splash into the working liquid, which condenses rapidly to form solid metal particles, which are taken away by the working liquid. At this time, a small pit trace is left on the surface of the workpiece, the discharge stops briefly, and the working fluid between the two electrodes returns to the insulating state.
Then, the next pulse voltage breaks down at another point relatively close to the two electrodes to produce spark discharge, and the above process is repeated. In this way, although the amount of metal etched by each pulse discharge is very small, because there are thousands of pulse discharges per second, more metal can be etched and has a certain productivity.
Under the condition of maintaining a constant discharge gap between the tool electrode and the workpiece, while etching the workpiece metal, the tool electrode is continuously fed to the workpiece, and finally the shape corresponding to the shape of the tool electrode is processed. Therefore, as long as the shape of the tool electrode and the relative motion mode between the tool electrode and the workpiece are changed, various complex profiles can be machined. Tool electrodes are often made of corrosion-resistant materials with good conductivity, high melting point and easy processing, such as copper, graphite, copper tungsten alloy and molybdenum. In the process of machining, the tool electrode also has loss, but it is less than the corrosion amount of workpiece metal, and even close to no loss.



Machining characteristics of ZNC540 Die Sinking Mould EDM


1. The current density in the discharge channel is very high, and the high temperature generated in the local area is enough to melt or even vaporize any conductive material. Therefore, it can process all kinds of hard, brittle, soft and tough materials with conductive properties.
2. During machining, the tool does not contact with the electrode, and there is no cutting force between them. It is suitable for machining small holes, thin walls, narrow cavity grooves and various complex holes, cavities and curved holes.
3. During machining, the pulse width can be adjusted, and rough, medium and finish machining can be carried out continuously on the same machine tool.
4. Direct use of electric energy processing is convenient to realize the automatic control and processing automation of the processing process.




The picture of ZNC540 Die Sinking Mould EDM


                            



Technical Parameter


Mechanical

ZNC540

Workbench

800x480

Work slot

1250X770X500

Left and right trip

500

Before and after the trip

400

The Z axis stroke(mm)

 Servo

220

 Move

260

Maximum distance between spindle and table

580

Maximum electrode weight

80

Maximum working weight

1500

Machine weight

1600

Packing size

1570X1600X2400

Capacity of filter box

 300Litre

Filter weight

200