-
E-mail
Juliet.zhu@talentcnc.com
- Phone
-
Address
Room 1210, Fanhua Center Mansion A, 4555 Renmin Road, Xiangcheng District, Suzhou, China
Membership
Help
Suzhou Talent Import and Export Co., Ltd.Free·1YRS
Juliet.zhu@talentcnc.com
Room 1210, Fanhua Center Mansion A, 4555 Renmin Road, Xiangcheng District, Suzhou, China
Introduction to VMC-650 Turning milling machine center
The high-precision vertical machining center can automatically complete the processing of milling, boring, drilling, expanding, tapping (rigid tapping) and other processes. It is widely used, especially suitable for processing various complex two-dimensional and three-dimensional concave convex models and complex cavities and surfaces. It is suitable for medium and small batch production of precision parts such as plates, plates and shells. It is widely used in the processing of 3D complex parts in aviation, aerospace, auto parts and molds.
The vertical machining center adopts direct connected high-speed spindle and herringbone column design to improve the seismic capacity of the whole machine, so that the machining center can maintain high-precision machining standards under the condition of high-speed machining. It is a high-speed vertical machining center widely used in the machining of CNC precision parts.
Product characteristics of VMC-650 Turning milling machine center
1. The direct connected 15000 RPM high-speed spindle is inspected and adjusted by the dynamic balancing machine, with small vibration, which can prolong the service life of the spindle. The servo motor meets the needs of high-speed and high-precision processing. The three axes are driven by high-precision ball screw to ensure the transmission accuracy.
2. The box structure with large-span herringbone column design ensures that the machine tool will not deform after long-term use, greatly improves the seismic capacity of the whole machine, ensures its processing stability, and has a humanized dialogue interface for easy operation.
3. Mitsubishi system is configured, 1GB memory card can be expanded, thousands of programs can be stored and called at any time, so as to save the trouble of processing while transmitting.
4. The spindle servo motor adopts high torque and high horsepower motor to meet the needs of high-speed and high-precision processing.
5. The spindle adopts oil-cooled compressor for constant temperature to ensure that the precision of the spindle will not be affected under high-speed operation, and gas is added to ensure that there are iron filings and other sundries in the spindle taper hole to prevent them from affecting the precision of the spindle taper hole.
6. The electric control box adopts heat exchanger for heat dissipation, and the matching of mechanical feed and rotating speed gives full play to the effect of processed products.
7. The three-axis adopts high-precision C3 ball screw and precision ball bearing for pre tension to ensure the precision of thermal expansion and prevent damage to the precision parts of the system at high temperature.
8. The cutting fluid has large capacity and can quickly discharge the cutting heat. The water tank is designed as a double box type and placed inside the machine to save space.
9. The machine design is simple and saves floor space.
The picture of VMC-650 Turning milling machine center

Technical Parameter
| Model | VMC-650B/C |
| X-axis Travel (mm) | 600 |
| Y-axis Travel (mm) | 500 |
| Z-axis Travel (mm) | 500 |
| Spindle end to table (mm) | 110-610 |
| Spindle speed (rpm) | 10000 |
| Spindle motor power (kw) | 7.5 |
| Three axis motor power (kw) | X2/Y2/Z2 |
| Table area (mm) | 500*800 |
| T-groove (groove * width * center distance) (mm) | 3-18*144 |
| X-axis rapid displacement (mm/min) | 24000/36000 |
| Y-axis rapid displacement (mm/min) | 24000/36000 |
| Z-axis rapid displacement (mm/min) | 18000/36000 |
| Feed rate (mm/min) | 1-8000 |
| Spindle taper | BT40 |
| Prop quantity | 24 |
| Maximum tool diameter (mm) | 80 |
| Maximum tool length (mm) | 200 |
| Tool weight (kg) | 7 |
| Tool magazine category | Bamboo hat / knife arm |
| Air pressure source (kg/cm²) | 5.5 |
| Bearing of worktable (kg) | 600 |
| Machine tool weight (kg) | 5500 |