-
E-mail
Juliet.zhu@talentcnc.com
- Phone
-
Address
Room 1210, Fanhua Center Mansion A, 4555 Renmin Road, Xiangcheng District, Suzhou, China
Membership
Help
Suzhou Talent Import and Export Co., Ltd.Free·1YRS
Juliet.zhu@talentcnc.com
Room 1210, Fanhua Center Mansion A, 4555 Renmin Road, Xiangcheng District, Suzhou, China
Product introduction of VMC-1060 super speedy cnc machine center
VMC-1060 super speedy cnc machine center is a cost-effective vertical machining center developed by our company for small hardware parts and products. The machine tool has the advantages of strong structure, stable precision, low failure rate and good reliability. It is a sharp tool for processing small products.
The three axes of the machining center adopt linear slide rail, which has the characteristics of high rigidity, high positioning accuracy, low noise and low friction. It can be used for rapid displacement (48m / min) to obtain the best circular accuracy.
The main structure casting of the machining center adopts high-quality mihanna cast iron, which has stable organization and permanently ensures the quality; The casting is calculated and analyzed by computer through finite element analysis method, and the reasonable structural strength and the matching of stiffeners provide high mechanical rigidity; The super wide base and column are box structure, the saddle is widened and lengthened, the heavy load full support design, and the structure is solid, which can ensure the heavy load capacity during processing; The main shaft head is reinforced with ribs, and the contact length ratio between the main shaft head and the column is appropriate to provide stable support for the main shaft.
The machine is equipped with anti-collision device, which can absorb the vibration caused by the impact caused by workers' misoperation, minimize the impact damage and ensure the original accuracy; The machine adopts oil-water separation design, which can effectively separate the lubricating oil from the cutting fluid and prevent the deterioration of the cutting fluid due to mixing and affect the processing quality; The machine adopts Taiwan's high-precision high-rigidity high-precision spindle. The belt spindle has strong rigidity and high reliability. The direct spindle has high speed, high efficiency, high precision, low noise and low vibration, which fully meets the needs of users.
Application scope of VMC-1060 super speedy cnc machine center
1. Rigid machine tools should have production occasions with low failure rate and good reliability.
2. It is especially suitable for processing occasions of high-speed reciprocating motion of spindle box.
3. Short throat deep high rigidity compact structure with large torque device, the production efficiency is increased by more than 30%, which is suitable for heavy-duty processing of ferrous metals.
The picture of VMC-1060 super speedy cnc machine center
Technical Paramete
| Model | VMC-1060B/C |
| X-axis Travel (mm) | 1100 |
| Y-axis Travel (mm) | 600 |
| Z-axis Travel (mm) | 600 |
| Spindle end to table (mm) | 70-670 |
| Spindle speed (rpm) | 10000 |
| Spindle motor power (kw) | 11 |
| Three axis motor power (kw) | X3/Y3/Z3 |
| Table area (mm) | 600*1300 |
| T-groove (groove * width * center distance) (mm) | 5-18*100 |
| X-axis rapid displacement (mm/min) | 24000/36000 |
| Y-axis rapid displacement (mm/min) | 24000/36000 |
| Z-axis rapid Displacement (mm/min) | 18000/36000 |
| Feed rate (mm/min) | 1-6000 |
| Spindle taper | BT40 |
| Prop quantity | 24 |
| Maximum tool diameter (mm) | 100 |
| Maximum tool length (mm) | 305 |
| Tool weight (kg) | 7 |
| Tool magazine category | Bamboo hat / knife arm |
| Air pressure source (kg/cm²) | 6 |
| Bearing of worktable (kg) | 1000 |
| Machine tool weight (kg) | 8000 |