-
E-mail
Juliet.zhu@talentcnc.com
- Phone
-
Address
Room 1210, Fanhua Center Mansion A, 4555 Renmin Road, Xiangcheng District, Suzhou, China
Membership
Help
Suzhou Talent Import and Export Co., Ltd.Free·1YRS
Juliet.zhu@talentcnc.com
Room 1210, Fanhua Center Mansion A, 4555 Renmin Road, Xiangcheng District, Suzhou, China
Machining range of 6150 Economical Lathe Machine
1. Turning is to change the shape and size of the blank by using the rotary motion of the workpiece and the linear motion or curve motion of the tool on the lathe, and process it to meet the requirements of the drawing.
2. Turning is suitable for machining rotary surface. Most workpieces with rotary surface can be machined by turning method, such as inner and outer cylindrical surface, inner and outer conical surface, end face, groove, thread and rotary forming surface. The tools used are mainly turning tools.
3. The machine can not only turn the workpiece with turning tool, but also drill, reamer, tap and knurling cutter for drilling, reaming, tapping and knurling.
Main parts of 6150 Economical Lathe Machine
1. Spindle box
The spindle fixed at the left end of the machine body and installed in the spindle box clamps the workpiece through clamps such as chuck. The function of spindle box is to support and drive the spindle, so that the spindle drives the workpiece to rotate at the specified speed.
2. Tool holder
The tool rest part is located on the bed saddle. Its function is to clamp the turning tool and make the turning tool move longitudinally, transversely or obliquely.
3. Tailstock
It is located on the tailstock track of the bed, and the position can be adjusted longitudinally along the guide rail. The function of the tailstock is to support the workpiece with the rear center. Machining tools such as drill bits can also be installed on the tailstock for hole machining. It is mainly used to support the workpiece or install tools such as drill bit, reamer and circular die in the top sleeve of tailstock to process the workpiece. The hand wheel is mainly used to rotate the lead screw tailstock for basic operation.
4. Feed box
It is fixed on the left front side of the bed and the bottom of the spindle box. Its function is to change the pitch of the machined thread or the feed rate of the motorized feed. There is a speed change device and control mechanism for feeding movement in the feed box, whose function is to change the pitch of the processed thread or the feed amount of the motor feed.
The picture of 6150 Economical Lathe Machine
Technical parameter
Model | CA6150 | |
Max.Swing over bed | 500mm | |
Max.Swing over carriage | 300mm | |
Max.length of work piece | 1000/1500/2000mm | |
Width of bed | 400mm | |
Section of turning tool | 25×25mm | |
Spindle | Spindle speed | 16-1400rpm/16-1400rpm(24steps) |
Hole through spindle | 52mm. (80mm). (105mm) | |
Spindle taper | No.6(MT6)(Φ90 1:20)(Φ 113:20) | |
Feed | No. of feed | 64 kinds (for each) |
Range of metric threads | 1-192mm (44 kinds) | |
Range of inch threads | 1-24tpi (21kinds) | |
Range of module threads | 0.25-48(module 39 kinds) | |
Range of diametral pitc threads | 1-96DP (37 kinds) | |
Tailstock | Max. Tailstock spindle travel | 150mm |
Tailstock spindle diameter | 75mm | |
Taper of tailstock spindle center hole | NO.5 (MT5) | |