Welcome Customer !

Membership

Suzhou Talent Import and Export Co., Ltd.
Free Member ·1YRS
,
Other

Main Products: 切线机

Xwboo>Products
Product Categories

Suzhou Talent Import and Export Co., Ltd.Free·1YRS

  • E-mail

    Juliet.zhu@talentcnc.com

  • Phone

  • Address

    Room 1210, Fanhua Center Mansion A, 4555 Renmin Road, Xiangcheng District, Suzhou, China

Contact Now

6HG Manual Turret Bench Top Milling Machine

Model
Nature of the Manufacturer
Other
Product Category
Place of Origin
City, Province
Overview
Turret milling machine adopts Mihanna high-grade castings. The machine spindle tube surface high frequency quenching hardening treatment, hard chromium plating, precision grinding.Turcite-b is attached to the front and back, left and right (X, Y axis).The machine is with high frequency quenching and precision grinding of front and rear slideways and high precision 7207cp4 spindle bearing.It is a kind of light general metal cutting machine, which has two functions of vertical milling and horizon.
Product Details

Brief introduction of 6HG Manual Turret Bench Top Milling Machine


The turret milling machine adopts the vertical arrangement of the main shaft, and the worktable can be lifted up and down. The milling cutter used by the vertical milling machine is relatively flexible and has a wide range of application. It can use end milling cutter, machine clamp cutter head, drill bit, etc., and can mill keyway, plane, boring, etc. It is mainly suitable for processing planes, slopes, grooves, holes and threads of various parts,

It is an ideal processing equipment for machinery manufacturing, molds, instruments, meters, autos, motorcycles and other industries.



Characteristics of 6HG Manual Turret Bench Top Milling Machine


1. Adopt strong vertical steel head milling head, gear box and brake seat are processed by high-grade cast iron, with good rigidity, low deformation, heavy specific gravity and more accurate cutting; The transmission structure of the original spindle in Taiwan adopts a patented special design. The end milling head and cantilever are exclusively patented and locked with five screws on both sides. It has strong horsepower and is suitable for heavy cutting. It is matched with NSK P4 precision spindle bearing.

2. The spindle is made of integrated formed scm-21 material, which is subject to quenching, tempering, carburizing and precision grinding. Precision P4 bearings are selected. The purchase, assembly and testing process are strictly controlled to ensure that the swing error is controlled within 0.002mm.

3. The casting is made of fc-30 and fcd-45 high-grade strong and tough cast iron, matched with the internal super stiffener, and subject to forced tempering to eliminate the internal stress and ensure the strength and rigidity. The stiffener design is exclusively adopted on both sides of the casting to ensure the stability and accuracy of the machine during heavy cutting.

4. The worktable is made of fc-30 high-grade strong and tough cast iron. The extended and widened improved double dovetail worktable is 1470 * 320mm. The worktable and slide rail are quenched and tempered, and then hardened and ground by high cycle. After the T-groove is accurately processed, the three grooves and six sides are precisely ground, and the full stroke tolerance is within 0.01m/m, so that the workpiece processing operation is fast and convenient.

5. The X and Y axes adopt C5 pre pressed double nuts, precision ball screws and locking devices, with smooth escort, small clearance and good positioning. 10. Y-axis slideway, dovetail and adjustment "a" are fully pasted with turcite-b wear-resistant plate, and then precision manual spading is carried out to ensure lasting precision and wear resistance. 10. Y-axis and z-axis slideways are protected by precision wiper blades to ensure that the slideway is not scratched.

6. The electronic reading system adopts the first brand letter and electronic ruler in China, which makes the reading more accurate and stable, and realizes the complete dust-proof, water-proof, oil-proof and shock proof of the reading system, so as to ensure the accurate reading and provide processing accuracy and efficiency.




The picture of  6HG Manual Turret Bench Top Milling Machine 



                                      6HG Manual Turret Bench Top Milling Machine.jpg






Technical Parameter


Machine Model 6HG
Working Surface Area of Table 305*1370
12"*54"
Travel of Table X-axis(mm) 785
Y-axis(mm) 435
Z-axis(mm) 500
Track Y-axis(mm) Square
Z-axis(mm) Square
Spindle Spindle Taper NT40
Spindle Speed(mm) 127
Spindle Speed 16steps/variable
Spindle Feed(mm) 0.076/0.003" 0.038/0.0015" 0.203/0.008"
Low Range(r/min) 66、110、175、270、550、930、1460、2270/variable
High Range(r/min) 132、220、350、540、1100、1860、2920、4540/60、4200
T-slot Solt Number* Width(mm) 3*16
T-slot Pitsh(mm) 65
Motor Voltage(v) 220/380/415
Frequency(HZ) 50/60
Head Motor 5HP/3.7kw
 Coolant Motor 1/8HP
Knee Motor 1/2HP
Max Working Piece Weight(kg) 300
Saddle W*L(mm) 330*650
Ram Travel(mm) 480
Spindle Diameter 105
From spindle center to body Min(mm) 195
Max(mm) 675
From spindle nose to working table Min(mm) 90
Max(mm) 590
Machine DimensionL*W*H(mm)
1770*1780*2300
Net Weight(kg) 1500