-
E-mail
Juliet.zhu@talentcnc.com
- Phone
-
Address
Room 1210, Fanhua Center Mansion A, 4555 Renmin Road, Xiangcheng District, Suzhou, China
Membership
Help
Suzhou Talent Import and Export Co., Ltd.Free·1YRS
Juliet.zhu@talentcnc.com
Room 1210, Fanhua Center Mansion A, 4555 Renmin Road, Xiangcheng District, Suzhou, China
Application scope of EDM-2000 broken tap drill remover machine
1. It is mainly used for processing deep and small holes on workpieces made of stainless steel, quenched steel, cemented carbide, copper, aluminum and other conductive materials
Hole. Such as wire threading hole of WEDM workpiece; Chemical fiber spinneret holes, filter plates and group holes on sieve plates; Heat dissipation holes of engine blades and cylinder blocks, oil and air path holes of hydraulic and pneumatic valve bodies, etc.
2. A strong permanent magnet suction cup is installed at the bottom of the spindle head, which can be adsorbed on the workpiece for processing. It can penetrate directly from the inclined plane and curved surface of the workpiece. The depth diameter ratio of machined hole is more than 300:1.
3. The machine tool can also be used for electro etching to remove the drill bit, tap, reamer, etc. broken in the workpiece without damaging the original hole or thread of the workpiece.
4. Hole processing with position accuracy requirements can be realized by borrowing the tool feeding device of other equipment.
Characteristics of EDM-2000 broken tap drill remover machine
● new generation upgrade of handpiece
● touch screen man-machine interface design cabinet
● plunger pump is adopted, with high pressure and continuous operation
● high processing speed, low loss, fast up and down, using spindle hybrid stepping servo system
● can be worn on quenched steel Ф 1 deep hole, speed up to 20mm / min
The picture of EDM-2000 broken tap drill remover machine

Technical parameter
project | parameters |
Parameter function | EDM-2000 |
Input voltage of main box (V) | AC220V 50Hz |
Input power (W) | 1500 |
High pressure pump input voltage (V) | AC220V 50Hz |
Maximum pressure of working fluid (MPA) | 8 |
Maximum machining depth (mm) | 300(Φ1) |
Machining diameter range (mm) | 0.5-3 |
Servo stroke of main engine head (mm) | 320 |
Base manual travel (mm) | 450 |
Appearance dimension of main box (mm) | 540×275×500 |
Appearance dimension of main engine head (mm) | 430×160×700 |
Appearance dimension of high pressure water system (mm) | 600×300×460 |
Gross weight (kg) | 75±0.5 |