CNC Hydarulic Press Brake (8+1 Axis)

1.Totally EU streamlined design,Monoblock by welding robots & aparatus and stress relief process by Annealing treatment.

2.Hydraulic synchronised positive stop design,ａnd by DELEM programmable controller assuring accurate repeatability &ease of use.

3.Integrated hydraulic system(Bosch-Rexroth form Germany)allowing rapid approach switching automatically to slow bend.

4.Servo drive with DA66T System operated back gauge with quality support fingers also with vertical adjustment

5.Inch, single mode being designed for the machine and servo and maintain time can be controlled by the server Driver.

6.the distance of upper slide moving down is adjusted by grating ruler with high precision

7.Safe fence and the electric inter locker have been designed for the machine to ensure the operation safety.

2. Standard Equipment:

• Delem DA66T CNC control System
• Powered Depth Y1, Y2, X, Z1, Z2, R, V, Back gauge X-axis (X-axis 0.01mm/Y1/Y2X/Z1,Z2-axis 0.01mm)
• Servo motor control block
• HIWIN Ball screws & Polished rod with 0,01mm accuracy.
• Plate Support Arms
• Germany Bosch-Rexroth Hydraulic
• Germany EMB Tubing connector
• Germany Siemens Main Motor
• Tele mecanique/Schneider Electrics
• Hydraulic &Electrical overload protection
• Top and Bottom Tooling(86°,R0.6mm)
• Safety Standards(2006/42/EC):