Welcome Customer !

Membership

Zhejiang TTN Electric Co., Ltd.
Free Member ·1YRS
,
Other

Main Products: 稳压器

Xwboo>Technical Article>What are the advantages of automatic voltage stabilizer

Zhejiang TTN Electric Co., Ltd.Free·1YRS

  • E-mail

    ttn@ttnpower.com

  • Phone

    +86-577-86272111/+86-17757752598

  • Address

    NO.28,Chuangda Road,Lucheng Light Industrial Zone,Wenzhou China

Contact Now
What are the advantages of automatic voltage stabilizer
Date: 2022/11/13Read: 124

What are the advantages of automatic voltage stabilizer? In addition, ac voltage regulator can be used in what fields? How should we use the voltage regulator safely?



  •  Application of ac voltage regulator

  •  What are the characteristics of automatic voltage stabilizer?

  •  How to use voltage regulator safely?


企业微信20220422-1337112x

Application of ac voltage regulator

AC voltage regulator is a kind of power supply device which can adjust output voltage automatically. The function of ac voltage regulator is to stabilize the power supply voltage that fluctuates greatly and does not meet the requirements of electrical equipment within its set value range, so that all kinds of circuits or electrical equipment can work normally under the rated working voltage.


AC voltage regulator is widely used in industrial and mining enterprises, oil fields, railways, construction sites, schools, hospitals, posts and telecommunications, hotels, scientific research and other departments of monitoring equipment, precision machine tools, computed tomography (CT), precision instruments, testing equipment, elevator lighting, imported equipment, production lines and other places that need stable power supply voltage; It is also used for the electrical equipment with too low or too high power supply voltage, big fluctuation and big load change at the end of low-voltage distribution network. It is especially suitable for all voltage regulated places that need high grid waveform.



What are the characteristics of automatic voltage stabilizer?

1. Automatic voltage stabilizers automatically calibrate the voltage periodically to provide a consistent voltage for the motor. This consistent voltage facilitates the efficient operation of electrical equipment and prevents any damage to it due to voltage fluctuations. This improves efficiency and reduces maintenance costs for all equipment. Ultimately, this will result in zero production losses and increase the efficiency of your factory.

2. Automatic regulators have faster correction rates that help them operate over a wide range of input frequencies without any waveform distortion. They provide a high level of reliability through their special high-performance control circuits. With these types of regulators, you can easily switch between manual and automatic operating modes, and the overvoltage and undervoltage indicators keep you informed.



How to use voltage regulator safely?

1. Above all, buy according to the power of voltage regulator, the input output end that chooses appropriate wire connection voltage regulator. (Note: the installation should be strictly in accordance with the voltage regulator wiring label. Pay special attention to live line and neutral line cannot be connected inversely. Zero line and ground line should not be confused. Ground and neutral lines of ground cannot be omitted. Open voltage regulator switch, panel voltmeter output should show 220V, panel power indicator light is on, said voltage regulator has worked normally. If it is necessary to adjust the output voltage, adjust the voltage potentiometer on the machine circuit board clockwise to increase the output voltage.

2. The following voltage regulators use fuses for overload or short circuit protection, ac voltage regulators above 5kVA use mini-circuit breakers or small air switches for overload or short circuit protection. When the voltage regulator is working, if the fuse is blown or the automatic air circuit breaker trips, it should stop to check the load and voltage regulator.

3. When the output voltage exceeds the voltage regulator protection value (the phase voltage protection value is adjusted to 250V±5V when leaving the factory), the voltage regulator will automatically protect, reduce or cut off the voltage output voltage of the voltage regulator, the overvoltage indicator is on, the user should immediately shut down to check the grid voltage or voltage regulator. When the regulator is working, if the output voltage jitter, it may be capacitive or inductive load is too large. Users can adjust the switch on the circuit board in the chassis to eliminate jitter (please turn off the load when adjusting). If jitter cannot be eliminated, it may be caused by excessive resistance in the input grid line or serious distortion of the input waveform.



ac voltage regulator is widely used in the need of stable power supply voltage; It is also used for electrical equipment with large fluctuation and load variation. If you are looking for a supplier of automatic voltage stabilizer with good quality and reasonable price, Zhejiang TTN Electric Co., Ltd. is a very good choice.