Nowadays, AC Stabilizer has become indispensable equipment in family life and is even needed in the industrial and medical fields. So, what is AC Stabilizer for? How should people choose the right voltage regulator?

What is AC Stabilizer?
Embedding microprocessor chip technology and power electronics into the design of an intelligent AC voltage stabilizer (or automatic voltage regulator (AVR)) can produce high quality and stable power supply in the event of significant and persistent deviations in the supply voltage. As an improvement over traditional relay-based regulators, modern innovative regulators use high-performance digital and solid-state control circuits, do not need to adjust the potentiometer, and allow the user to set voltage requirements through the keyboard, and have output start and stop functions. Nowadays, the voltage regulator has become an optimized power supply solution for many electronic equipment sensitive to voltage fluctuations, and has been used in CNC machine tools, air conditioners, TELEVISION sets, medical equipment, computers, telecommunications equipment and many other equipment.
How to choose the right size voltage stabilizer?
1. Check the power rating of the equipment you will be using with the stabilizer by looking at the nameplate details (examples: transformer nameplate, MCB nameplate, capacitor nameplate, etc.) or the product user manual.
2. Since stabilizers are measured in kVA (the same way transformers are measured in kVA instead of kW), the wattage can also be calculated by simply multiplying the voltage of the device by the maximum rated current.
3. It is recommended to add a safety margin to the stabilizer rating, typically 20-25%. This may be useful for future plans to add more devices to the stabilizer output.
4. If the equipment is rated in watts, consider the power factor when calculating the kVA rating for the stabilizer. Conversely, if the regulator is rated in kW rather than kVA, multiply the power factor by the product of the voltage and current.
What is the installation method of AC Stabilizer?
1. Check the regulator housing, ammeter, switches, indicators, buttons and terminals.
2. Connect the voltage regulator input terminal to the switchboard and install a suitable fuse on the switchboard to ensure electrical safety.
3. Connect the power supply of the electrical equipment to the output end of the meter, pay attention to the rated input voltage of the electrical equipment and the voltage regulator of the rated input voltage, do not connect wrong.
4. First open the voltage regulator power switch, indicator light, observe whether the voltmeter indicator value is normal. If the output voltage is normal, turn on the power switch of the electrical equipment, and the voltage regulator will automatically adjust the voltage.
5. If the electrical equipment needs to be idle for a long time, please turn off its power switch to reduce power consumption and extend the service life of the regulator.
6. The voltage regulator should not be overloaded. When the market voltage is low, the output capacity is reduced, please reduce the voltage regulator load.
7. Choose electrical appliances for refrigerators, air conditioners, water pumps and other electrical appliances with motor, should choose capacity of more than 3 times the voltage regulator, in case the device starting current exceeds the voltage regulator's fusing current or overcurrent protection circuit breaker current, so as to fuse or circuit breaker trip.
8. The wire connecting the voltage regulator shall have a sufficient cross-section to prevent heating and reduce voltage drop. The capacity of the voltage regulator above 2kVA should be connected by terminal, using a single copper wire. At the same time, tighten the terminal screws to prevent the connection from heating up.
9. Whether single-phase or three-phase voltage regulator, it should be connected to all the wires after the first off the load power switch, and then open the regulator. After confirming that the output voltage is normal, turn on the load power switch.
This article will help you understand the basic steps to consider before purchasing a voltage regulator for your application. If you are looking for a supplier of AC Stabilizer with good quality and reasonable price, Zhejiang TTN Electric Co., Ltd. is a very good choice.