Single Phase 3hp Induction Motor Price

MY series aluminum housing single phase 3hp induction motor price, with run capacitor, is made of selected quality materials and conform to the IEC standard. MY motors have features of good performance, low noise, little vibration and safety and reliable operation. The multiple of starting torque is 0.3-0.7 (MY), 0.45-0.75 (MYT). MY motors are suitable for the occasion where there requirements of starting torque is low and long-term continuous working, such as home electric appliances, pumps, fans, and recording meters, etc.

Product Detail

Motor Type: single phase 3hp induction motor price

Output Power: 0.06 kW - 3 kW

Frame Size: IEC 56 - 100

Number of Poles: 2 and 4

Voltage: 220V / 230V / 240V (can design based on customers` requirements)

Frequency: 50 or 60 Hz

Protection Level: IP54 or IP55

Insulation Class: B / F

Cooling Method: ICO141

Working Duty: Continuous (S1)

Product Parameter (Specification)

single phase 3hp induction motor price

Production Features

Know More Us

Why Us

Service and Packing

About motor

3.2 The rotor core has the same hazards as the stator core due to poor lamination quality: increased no-load current and increased electromagnetic noise. For the wound rotor, there is also the problem of forcing the designer to increase the insulation thickness due to the unstable quality of the core In addition, the following quality problems will occur.

3.2.1 When the quality of the rotor iron core is unstable and a "rhombus" appears, the accuracy of the dynamic balance will be affected, and then the vibration and noise of the motor will increase.

3.2.2 If the inner hole of the punching piece is out of tolerance, for the motor of the wound rotor with a single piece stacked on the shaft, because the tolerance of the shaft does not change (the tolerance value cannot be adjusted continuously with the wear of the mold), the rotor will not change. There is a large gap between the iron core and the shaft. Especially when the punching piece is stacked on the shaft at room temperature, when the rotor heats up and expands under load, the clearance will increase, which will not only contribute to the vibration and noise, but also destroy the coaxiality of the stator and the rotor. , make the air gap uneven, increase the unilateral magnetic pull, and then increase the deflection of the rotor. The "sweep" failure of wound rotor motors is directly related to this.

n or the air inlet and outlet are blocked;

13) The internal wiring of the new motor is incorrect;

14) The star-delta wiring is incorrect;