YCL series motor 5hp single phase is optimized from YC single phase capacitor start motor. The mounting dimension is fully conformed with IEC standard. YCL motors are superior motors delivering excellent torque enabling the toughest jobs to be handled with dependable ease and perform well in high voltage fluctuating regions. YCL series motors have the features of quiet operation, corrosion resistant, low vibration, low power consumption, long lifespan, low start current and good operation in hot environment. YCL motor are used in the pumping, compressor, agriculture, farming, building service and manufacturing industry.
Product Detail
Motor Type: 1 phase 5hp motor
Output Power: 0.75 kW - 5.5 kW
Frame Size: IEC 90 - 132
Number of Poles: 2 / 4
Voltage: can be customized based on users
Frequency: 50 & 60 Hz
Protection Level: IP54 / IP55
Insulation Class: B / F
Cooling Method: IC411
Duty: S1 (continuous)
Use Conditions: Ambient temperature -15℃-40℃, altitude ≤1000 meters.
Product Parameter (specification)
1 phase 5hp motor
Type | Power | Current (A) | Speed (r/min) | Eff (%) | Power Factor CosØ | Tst/Tn | Tmax/Tn | Ist/In | |
KW | HP | ||||||||
4 poles | |||||||||
YCL132SB-4 | 3.7 | 5 | 22.1 | 1420 | 84.8 | 0.9 | 2.11 | 1.81 | 6.6 |
Production Features




Know More Us


Why Us

Service and Packing

About reducer
Precautions during the running-in period of the reducer:
After the reducer leaves the factory, it is generally stipulated that there is a running-in period of about 200 hours (_pass time_oil change), which is stipulated according to the technical characteristics of the initial stage of the use of the reducer. The running-in period is an important part of the normal operation of the reducer, reducing the failure rate and extending its service life. According to the actual situation, the following precautions are given:
1. Reasonable selection of lubricating oil: especially geared motors with input power greater than 11KW must be filled with load gear oil. Pay attention to frequently check the lubricating oil, hydraulic oil, coolant, oil level and quality, and pay attention to check the airtightness of the whole machine. Excessive oil shortage is found during the inspection, and the reason should be analyzed. At the same time, the lubrication of each lubrication point should be strengthened. It is recommended to add grease to the lubrication point every week during the running-in period (except for special requirements). When connecting a vertical reducer with an oil pump, pay attention to the direction of rotation of the oil pump. Clockwise rotation is correct.
2. While keeping the reducer clean, adjust and tighten loose parts in time to prevent the loose parts from aggravating the wear of the parts or causing the parts to be lost.
3. At the end of the running-in period, the machine should be subject to mandatory maintenance, check and adjust, and pay attention to the replacement of oil.
In short, the requirements for use and maintenance of the reducer during the running-in period can be summarized as: strengthening training, reducing load, paying attention to inspection, and strengthening lubrication. As long as you pay attention to and implement the maintenance and maintenance of the reducer during the running-in period as required, it will reduce the occurrence of early failures, extend the service life, and improve production efficiency.
,
