，
The ML series single phase motor with two capacitors adopts the latest international design and is developed from high-quality materials according to IEC related standards. It has good performance, reliable operation, safety, beautiful appearance, convenient maintenance, low noise, and micro-vibration. A series of advantages such as light weight and simple structure. ML series motors are suitable for air compressors, water pumps, refrigerators, medical instruments, equipment and other small machines.
Product Detail
Motor Type: single phase motor with two capacitors
Output Power: 0.12 kW - 4 kW
Frame Size: IEC 63 - 112
Number of Poles: 2 / 4
Voltage: 220V / 230V / 240V (based on customers` requirements)
Frequency: 50 or 60 Hz
Protection Level: IP54 or IP55
Insulation Class: B/F
Cooling Method: ICO141
Working Mode: Continuous (S1)
Product Parameter (Specification)
motor 1 fase
Production Features
Know More Us
Why Us
Service and Packing
About Motor Reducer
Common problems during the running-in period of the reducer:
1. Operation error
Due to insufficient understanding of the structure and performance of the reducer (especially new operators), it is easy to cause malfunctions due to operating errors, and even cause mechanical accidents and safety accidents.
2. Fast wear speed
Due to the influence of factors such as the processing, assembly and debugging of the parts of the new reducer, the contact area of the mating surface is small, and the allowable torque is large. During the operation of the reducer, the concave and convex parts of the surface of the parts fit and rub each other, and the metal scraps that fall off are used as abrasives to continue to participate in the friction, which accelerates the wear of the mating surface of the parts. Therefore, during the running-in period, it is easy to cause wear of the parts (especially the mating surface), and the wear rate is too fast. At this time, if the load is operated, it may cause damage to the parts and cause early failure.
3. Poor lubrication
As the fitting clearance of newly assembled parts is small, and due to assembly and other reasons, lubricating oil (grease) is not easy to form a uniform oil film on the friction surface to prevent wear. Thereby reducing the lubrication effect, causing early abnormal wear of the machine parts. In severe cases, it will cause scratches or seizures on the friction surface of the precision fit, leading to failures.
4. Loose
Newly processed and assembled parts have deviations in geometric shapes and matching dimensions. In the early stage of use, due to the impact of alternating loads such as impact and vibration, as well as the influence of factors such as heat and deformation, and excessive wear and other reasons, they are easy to cause The originally fastened parts are loose.
5. Leakage occurs
Due to the loosening of parts, vibration and the heat of the reducer, there will be leakage at the sealing surface and pipe joints of the reducer; some defects such as casting are difficult to find during assembly and debugging, but due to the vibration, The effect of impact, this defect is exposed and manifests as an oil leak. Therefore, leakage occurs occasionally during the running-in period.
