YCL series 7 hp electric motor single phase is optimized from YC single phase capacitor start motor. The mounting dimension is fully conformed with IEC standard. YCL motors are superior motors delivering excellent torque enabling the toughest jobs to be handled with dependable ease and perform well in high voltage fluctuating regions. YCL series motors have the features of quiet operation, corrosion resistant, low vibration, low power consumption, long lifespan, low start current and good operation in hot environment. YCL 1 hp electric motor 1725 rpm series motor are used in the pumping, compressor, agriculture, farming, building service and manufacturing industry.
Product Detail
Motor Type: 7 hp electric motor single phase
Output Power: 0.75 kW - 5.5 kW
Frame Size: IEC 90 - 132
Number of Poles: 2 / 4
Voltage: can be customized based on users
Frequency: 50 & 60 Hz
Protection Level: IP54 / IP55
Insulation Class: B / F
Cooling Method: IC411
Duty: S1 (continuous)
Use Conditions: Ambient temperature -15℃-40℃, altitude ≤1000 meters.
Product Parameter (specification)
7 hp electric motor single phase

Production Features




Know More Us


Why Us

Service and Packing

FAQ
The main reasons for winding short circuit are:
(1) The motor runs under overload for a long time, and the current in the winding is too large for a long time, which will make the insulation aging and brittle, lose its insulation, or crack and fall off due to vibration.
(2) The winding insulation is damp, and it is directly connected to the power supply without drying. The power supply voltage causes insulation breakdown.
(3) The insulation of the connecting wire or lead wire between the coil groups of the stator winding is poor or damaged by breakdown, or one or several coils are short-circuited due to careless wiring.
(4) Due to the careless operation of wire embedding, when the insulation of the outer layer of the magnet wire is scratched or the lead wire is welded, the temperature is high and it touches the end cover and forms a short circuit.
(5) Due to the careless assembly operation, the outer insulating layer of the magnet wire is broken and a short circuit is formed.
(6) The phase-to-phase insulation of the winding end or the slot of the double-layer winding is not well-padd, or is broken down.
(7) The end of the winding is too long and touches the end cover to form a short circuit.
(8) There are spring pads and balance pads in the motor, which constitute a short circuit between turns.
,
