，
The ML series dual-value capacitor aluminum shell 1 hp single phase motor 1440 rpm adopts the latest international design and is developed from high-quality materials according to IEC related standards. It has good performance, reliable operation, safety, beautiful appearance, convenient maintenance, low noise, and micro-vibration. A series of advantages such as light weight and simple structure. ML series motors are suitable for air compressors, water pumps, refrigerators, medical instruments, equipment and other small machines.
Product Detail
Motor Type: 1 hp single phase motor 1440 rpm
Output Power: 0.12 kW - 4 kW
Frame Size: IEC 63 - 112
Number of Poles: 2 / 4
Voltage: 220V / 230V / 240V (based on customers` requirements)
Frequency: 50 or 60 Hz
Protection Level: IP54 or IP55
Insulation Class: B/F
Cooling Method: ICO141
Working Mode: Continuous (S1)
Product Parameter (Specification)
1 hp single phase motor 1440 rpm
Production Features
Know More Us
Why Us
Service and Packing
About Bearing
How to solve the motor vibration? You need to be clear about these steps
① Disconnect the motor from the load, test the motor empty, and check the vibration value.
②Check the vibration value of the motor foot. According to the national standard GB10068-2006, the vibration value of the foot plate shall not be greater than 25% of the corresponding position of the bearing. If it exceeds this value, the motor foundation is not a rigid foundation.
③If there is only one or two diagonal vibrations of the four feet, the vibration will be qualified if the anchor bolts are loosened, indicating that the foot pads are not solid enough, and the anchor bolts will cause deformation and vibration of the machine base after the anchor bolts are tightened. Bottom feet are well cushioned, re-align them, and tighten the anchor bolts.
