，
The ML series dual-value capacitor aluminum shell 0.75 kw single phase motor adopts the latest international design and is developed from high-quality materials according to IEC related standards. It has good performance, reliable operation, safety, beautiful appearance, convenient maintenance, low noise, and micro-vibration. A series of advantages such as light weight and simple structure. ML series motors are suitable for air compressors, water pumps, refrigerators, medical instruments, equipment and other small machines.
Product Detail
Motor Type: 0.75 kw single phase motor
Output Power: 0.12 kW - 4 kW
Frame Size: IEC 63 - 112
Number of Poles: 2 / 4
Voltage: 220V / 230V / 240V (based on customers` requirements)
Frequency: 50 or 60 Hz
Protection Level: IP54 or IP55
Insulation Class: B/F
Cooling Method: ICO141
Working Mode: Continuous (S1)
Product Parameter (Specification)
0.75 kw single phase motor
Production Features
Know More Us
Why Us
Service and Packing
About Us
For many motor manufacturers, the placement of parts is an unavoidable problem. If the placement is reasonable, the parts will not be damaged. If they are placed improperly, they will affect the performance of the parts and the whole machine, and it will also cause defects on the production site. influences. Today, the editor will take you into the warehouse of Liyuan Motor, and let’s take a look
Motor manufacturers’ bearing caps, small end caps and other parts are relatively large in number; manufacturers who are not particular about it will use a hemp bag, a mess, countless and unclear, and Liyuan Motor has taken the necessary Measures to facilitate storage and transportation at the same time.
The storage of motor parts is a very delicate matter. For example, the machine base should be placed vertically, so as to avoid the unsuitability of its stop and bore diameter, especially for thin-walled machine bases. Stacked, the problem is more serious. In view of the performance requirements of the entire motor, Liyuan Motor has made relatively standardized requirements for the storage and transportation of parts, because the compliance of the parts is a prerequisite for the improvement of the performance level of the entire machine.
