，
MY series aluminum housing 2 hp motor 1 phase, with run capacitor, is made of selected quality materials and conform to the IEC standard. MY motors have features of good performance, low noise, little vibration and safety and reliable operation. The multiple of starting torque is 0.3-0.7 (MY), 0.45-0.75 (MYT). MY motors are suitable for the occasion where there requirements of starting torque is low and long-term continuous working, such as home electric appliances, pumps, fans, and recording meters, etc.
Product Detail
Motor Type: 2hp 1 phase motor
Output Power: 0.06 kW - 3 kW
Frame Size: IEC 56 - 100
Number of Poles: 2 and 4
Voltage: 220V / 230V / 240V (can design based on customers` requirements)
Frequency: 50 or 60 Hz
Protection Level: IP54 or IP55
Insulation Class: B / F
Cooling Method: ICO141
Working Duty: Continuous (S1)
Product Parameter (Specification)
1 phase 2hp motor
Production Features
Know More Us
Why Us
Service and Packing
About motor
Several common faults and treatment methods of three-phase asynchronous motors:
1. The motor stator has poor compression strength
Experience has shown that the main reason for the poor voltage strength of motor stators is mostly due to defects in winding insulation, such as: lead wire insulation sleeve breakage, winding end bumps, inter-phase insulation damage and aging, and motor dampness, etc., which cause winding insulation to be damaged. Breakdown, causing the motor to burn.
2. The motor no-load current is too large
The no-load current of the motor is related to factors such as the design of the magnetic material and the manufacturing level, as well as the power and the number of poles of the motor. Under normal circumstances, the no-load current and full-load current of the motor have a certain proportional relationship. The ratio of no-load current to full-load current is large when the power is small, the number of poles is large, and the ratio of the no-load current to the full-load current of Y series motors (% ). For a new motor or a motor with a winding winding, it is necessary to test the no-load current. If the measured no-load current of the motor exceeds the normal range, it indicates that there is a problem with the motor, and the cause needs to be investigated for processing. Table 2 lists the no-load asynchronous motor The reason and treatment method of high current.
