Welcome Customer !

Membership

Quzhou KingGo Machinery Co., Ltd.
Free Member ·1YRS
,
Other

Main Products: 阀门

Xwboo>Technical Article>How to maintain pneumatic ball valve
How to maintain pneumatic ball valve
Date: 2022/11/14Read: 46
How to maintain pneumatic ball valve
Dec 24, 2020

       1. Before use, spray water to clean the overflow part of the pipe and the valve body, so that the remaining iron filings and other foreign matter enter the valve body hole.

  2. In the closed state of the ball valve, some medium remains in the valve body and exerts a certain pressure. Before repairing the ball valve, first close the stop valve in front of the ball valve, open the ball valve to be repaired, and then completely release the internal pressure of the valve body. For electric ball valves or pneumatic ball valves, the power and air supply must be disconnected first.

  3, the general-purpose soft-sealed ball valve adopts PTFE as the sealing material, and the sealing surface of the hard-sealed ball valve is made of metal. If the pipe ball valve needs to be cleaned, care must be taken not to damage or leak the sealing ring during disassembly.

   4. When disassembling the flange ball valve, you must first fix the flange bolts and nuts, then tighten all the nuts slightly, and then tighten them again. Forcing a single nut first and then other nuts may cause the flange surface to leak or crack due to uneven surface, which may cause valve flange leakage.


Maintenance of pneumatic ball valve


   5. Pneumatic ball valve reminds that when cleaning the valve, the solvent used should not collide with the parts to be cleaned and will not corrode. If it is a pure balloon valve, it can be cleaned with gasoline. Other parts are usually cleaned with middle water. When cleaning, thoroughly clean the remaining dust, oil and other accessories. If it cannot be cleaned with water, it can be cleaned with alcohol and other cleaning agents without damaging the valve body and parts. After the cleaning is completed, the detergent is completely volatilized before cleaning.

   6. If there is a slight leakage in the package during use, you can slightly tighten the stem nut until the leakage stops.

  7. If it is kept open for a long time, the valve body and parts will rust and cannot be used normally. The ball valve must be protected from rain, moisture and flange cover. To ensure stable performance, valves stored for more than 12 months should be retested.