Hydraulic Plunger Cold Injection Marking Machine
Hydraulic Plunger Cold Injection Marking Machine
FM-300HS double gun hand push cold injection marking machine, room temperature marking machine, road marking equipment FM-300HS high pressure no cold dash machine (1. Hand push mode 2, moped mode) 1. Can be 4 guns, the original German imported internal replacement to the hydraulic pump 2. Honda GX200 original engine, excellent performance 3. Ergonomic frame design, good operating interface and cup holder design 4. Japanese original oil pump + overflow pressure stabilization design, so that any state is constant pressure spray, no pulse 5. Large aluminum alloy fuel tank + Mobil No.68 imported hydraulic oil, so that the working oil temperature is not more than 45 degrees, more lasting life. Apply to: Urban and urban road markings, airport and highway markings ,p arking lots, underground garages, court underlined, dense public areas, crossroads, heavy cold spray marking works like busy streets, bicycles and sidewalks. Applicable paint type: water paint ,c old paint, a variety of high and low viscosity acrylic line paint. Road step cold spray marking machine FM-300HS, double gun underline, can adjust the distance and height at will. FM-300HS underline machine is a good world trend underline machine, using large trips, less cycle professional underline pump, lines smooth, full, fog free edge. Equipped with hydraulic power adjustment system, without sensitive electronic original, and small pressure and flow fluctuations. Reliable Daewoo petrol engine with high power, excellent performance. Flexible operation, clear linear shape, full, and strong coating adhesion. Draw single lines, double lines, dashed lines and curves, and the line width can be adjusted at will. A machine is versatile, removing the spray gun can be used as an ordinary high-pressure no-gas spraying machine FM- -300HS walking booster Can ride, why need to walk?Hubei Fuma Machinery Co., Ltd. provides an efficient Linedrir and Grindlze connection to improve the efficiency of marking Product model: FM-300HS Operating speed: up to 10mph (16 km/h). 6mph (10 km/h) Power cc (Hp) 200 (6., 5) (Honda GX200 Original Power) Start-up system: gasoline power traction / ProStar system Exterior size: 150 * 80 * 100cm Weight: 130KG | TECH DATA |
| Maximum working pressure | 20Mpa |
| Maximum(stream)flow | 10 L / min |
| Maximum power | 6.5HP / 4800WGX200 Honda Engine |
| Nozzle size | Single gun 0.046in double gun 0.033im |
| Spray width | 5-50cm . |
| Spray thickness | 0.2-0.4mm |
| Aluminum tank capacity | 13L (Aluminum radiator sheet) |
| Total Weight | 125kg |
| Overall size | 165.1X81.3X 101.6cm |