QY25K-I Truck Crane
QY25K truck crane was developed by XCMG in 2000. Through constant upgrade, the travel and working performance are greatly improved. The chassis is three-axle which has strong power and cross-country capacity. The jib is optimized octagon section, which has excellent lifting capacity. The control system adopts hydraulic proportional (mechanical) control technique.
Parameter
| | |
|---|
Overall length | mm | 12550 |
Overall width | mm | 2500 |
Overall height | mm | 3380 |
Weight | | |
Total weight in travel | kg | 29400 |
Front axle load | kg | 6200 |
Rear axle load | kg | 23200 |
Power | | |
Engine model | | SC8DK280Q3 / WD615.329(domestic III) |
Engine rated power | kW/(r/min) | 206/2200 213/2200 |
Engine rated torque | N.m/(r/min) | 1112/1400 1160/1400 |
Travel | | |
Max. travel speed | km/h | 75 |
Min. turning diameter | m | 22 |
Min. ground clearance | mm | 260 |
Approach angle | ° | 16 |
Departure angle | ° | 13 |
Max. grade ability | % | 30 |
Fuel consumption for 100km | L | ≈37 |
Main performance | | |
Max. rated total lifting capacity | t | 25 |
Min. rated working radius | mm | 3000 |
Turning radius at turntable tail | m | 3.065 |
Max. lifting torque | kN.m | 1000 |
Base boom | m | 10.6 |
Fully extended boom | m | 33 |
Fully extended boom+jib | m | 41.15 |
Longitudinal outrigger span | m | 5.14 |
Lateral outrigger span | m | 6 |
Working speed | | |
Boom luffing time | s | 75 |
Boom full extension time | s | 100 |
Max. swing speed | r/min | ≥2.5 |
Max. speed of main winch (single rope) | m/min | ≥120 |
Max. speed of aux. winch (single rope) | m/min | ≥120 |