The manual permanent magnetic lifter is suitable for lifting and transporting flat machine parts and steel products, so it is applicable in mould and machine processing industries. For example, it is commonly seen in machining centers, ship building plants, machine manufacturing factories etc.
Product Details
The manual permanent magnetic lifter is suitable for lifting and transporting flat machine parts and steel products, so it is applicable in mould and machine processing industries. For example, it is commonly seen in machining centers, ship building plants, machine manufacturing factories etc.
The Structure:
The TX series manual permanent magnetic lifter adopts high performance permanent magnetic material (NdFeB magnet) as its core component, thus realizine smaller size, higher lifting capacity and longer life span.
For safety considerations, this permanent magnetic lifting device has a safety factor of 3.5, indicating that its lifting capacity is 1/3.5 of the maximum holding power.
With "V" grooves on the under surface, the manual lifting magnet is capable of lifting both round steels and steel plats. So it is also referred to as a dual-purpose lifting chuck.
Since a permanent magnet is used, so electricity is required. As a result, all risks associated with power failure and wiring breakage are eliminated.
Our permanent magnetic chuck has an optimized magnetic circuit, thus reducing the permanent t almost zero.
Thank to the paint spraying treatment, our steel hoisting magnet has an aesthetic appearance that could bring extra joy to operators.
Parameters
Model
Capacity kg
Main Dimensions
Net Weight KG
L
B
H
R
PML-100
100
Three time Break Force
94
65
69
155
2.5
PML-200
200
130
65
69
155
3.5
PML-300
300
165
93
95
185
9.5
PML-400
400
Three
time
Break
Force
206
95
95
200
12
PML-600
600
206
113
115
230
19
PML-1000
1000
260
135
140
255
34
PML-1500
1500
340
135
140
255
63
PML-2000
2000
356
160
166
320
82
PML-3000
3000
444
160
166
380
122
PML-4000
4000
530
175
175
550
160
PML-5000
5000
620
220
220
600
290
PML-6000
6000
808
235
290
800
380
Operation
Using high property ND-Fe-B, Changing magnetic force by rotating the handle, achieve retention and release the work-piece. Ring on the top of lifter and V type groove make work easy.
Before lifting, clean up the surface of workpiece first. Make sure the center of magnet chuck and workpiece weight coincide, then turn the crank from "-" to "+" . Check if it's auto-locked, then crane.
When lifting, overloading is prohibited.No body allowed to pass through under it.The temperature of workpiece and ambient can not over 80degree.without violent vibration and impact.
When lifting round work-piece, keep B chamfer liner contact with the workpiece adjacent angel. So the lifting force will only 30%~50% lifting capacity.
After finish lifting, turn the crank from "+" to "-".Then the workpiece drop off with the lifting jack.
Packaged and shipped
FAQ:
1. Is your product customized?
Thanks for your question. Yes, because the working condition are different, all our products are customized dependingon detail requirement! So if you give us more information about the lift capacity, span, lift height, power source and other specials, we will give you a very quick quote!
2. What's the information should I provide when inquiry?
Thanks for your question. The more information you provide, the accurate solution we can prepare for you! The information such as the lift capacity, span, lift height, or other specials you give us will be more appreciated.
3. How many operating methods for my selection?
Thanks for your question. The standard operating methods we provide is pendent controller with push buttons. Meanwhile, we can also provide the remote control with push buttons and the cabin (space capsule seat) control with joystick. You can choose any of them, just tell us!
4. The space of my workshop is limited, can the crane ok for mine?
Thanks for your question. For low headroom workshop, we have the Special products. The detail dimension please consult our professional engineer.
5. What's the information should I provide when inquiry?
a. What's the lifting material?
b. How much is the maximum lifting weight of the hoist?
c. Have you installed the rails? Do you need us supply the rails? How long is it?
d. Where are the working environment?
Hot Tags: 2000kg permanent magnetic lifter, China, suppliers, manufacturers, factory, price, for sale, electric cd1 hoist, chain block 20 ton, 5 ton chain block, hand pallet truck manual, chain block 2 ton, 5t magnet lifter