1/4 Turn Ceramic Valve

JX-0224

• Shut-off angle stop valve
• Size: 1/2″ X 1/2″
• Name: Cistern tap
• Body Material: Brass

Introduction: what is a ceramic cistern valve?

A 1/4-turn ceramic cistern valve is a device used to regulate water flow in a plumbing system. It is designed to be installed between the water supply and the fixtures and can be adjusted to control the amount of water that flows through the system. The valve is made of a durable material that can withstａnd high temperatures and features an easy-to-turn handle that makes it simple to operate. Features of the 1 /4 turn ceramic cistern valve include an easy-to-turn handle, a capacity range from 8 to 25 gallons per minute, and ease of installation. Examples of other features include a minimum water pressure of 30psi; and a maximum temperature of 180 degrees F.

The Benefits: why use a ceramic valve?

A ceramic valve is a device that controls the flow of water in a toilet cistern. It is a more durable and reliable alternative to a rubber valve.

Ceramic valves are less likely to leak than rubber valves. They are also more resistant to corrosion and can withstａnd higher temperatures. This makes them ideal for use in hot water systems.

Ceramic valves are also quieter than rubber valves and have a longer lifespan. They require less maintenance than rubber valves and are less likely to need replacing.

The Different Types: what types of ceramic valves are there?

There are three main ceramic valves: ball, butterfly, and check valves. Ball valves have a ball-shaped disc that opens and closes to allow or block water flow. Butterfly valves have a disk that rotates on a hinge to open or close the valve. Check valves have a flap that opens and closes to allow or block water flow.

How to Install: a step-by-step guide

Installing a ceramic cistern valve is a simple process that can be completed in four easy steps. With just a few tools and basic knowledge, anyone can install this type of valve in their home.

First, shut off the water supply to the area where the valve will be installed. Next, remove the old valve by unscrewing it from the wall. Once the old valve is removed, clean up any debris or residue before installing the new valve. To do this, screw the new valve and turn the water supply on. Test the new valve by flushing the toilet or running the faucet to ensure it works properly.

More specifications of the angle stop valve?

1/4 Turn Ceramic Valve is the perfect addition to your bathroom or kitchen. This valve has a smooth, easy-to-turn operation and is made of durable ceramic. It’s ideal for sinks, showers, and tubs.

This valve is a must-have for any home. It is made of high-quality materials and is built to last. It is easy to install and use and provides a great way to control the water flow in your home.

Standard of angle stop valve?

An angle stop valve is a quarter-turn valve often used as a shut-off valve for plumbing fixtures. It is also known as a water hammer arrestor or an angle stop. The angle stop valve is usually installed at each fixture’s incoming water supply pipe. This allows each institution to be shut off independently without affecting the others.

The angle stop valve has a cylindrical body with two ports at 90 degrees to each other. A threaded stem extends from the center of the body and is connected to a handle. When the handle is turned, the branch moves a disk-shaped plug inside the body to block or allow flow through one of the ports.

Angle stop valves are available in various materials, including brass, chrome-plated brass, and stainless steel.