Chrome Angle Water Valve

JX-0202

• Angle Valve
• Size 1/2″ X1/2″,1/2″ X3/8″
• Zinc alloy handle
• Brass Body With Chrome plated
• Max work temperature; -10-120℃
• The max working pressure; is 12 bar
• Brass cartridge
• Three million times open-off working is guaranteed
• We can help you solve this problem because our triangle valve can match the G3 / 8 interface and the G1/2 interface. We are professional manufacturers. Please confirm the size of the water pipe by ourselves. G3/8 is smaller than G1/2 flow.

  90-degree Turn brass stop valve

  Angle Valve Size	1/2″x1/2″,1/2″x3/8″
  Valve pressure	150 Psi
  Valve Materials	Normal brass, Hpb59-1
  Valve Standards	BS2779,EN331,ISO228,DIN 259
  Working Temperature:	From 0 ℃ To +90 ℃
  Seat sealing Material:	PTFE
  Handle Material:	Zinc Alloy, Plastic
  Thread connection:	ISO228,BS2779,DIN 259, ASME B1.20.Pipe Thread
  Quality/valve Certifications	CE,ISO9001,UPC,ACS
  Finish;	Polished and chrome plated and
  Cartridge	Brass cartridge
  Valve operator	Handwheel
  Nickname	Outlet angle water valve
  O ring	NBR
  Salt spray test	Acetic acid/ASS 24 hours

The inlet and outlet ports can be threaded for connecting to galvanized steel and iron pipes, or they can have compression fittings for connecting to copper pipes. When an angle valve is used as a shut-off valve for residential plumbing fixtures, it is called an angle stop valve or simply an angle stop.

Standard of angle stop valve?

An angle stop valve is a quarter-turn valve often used as a shut-off valve for plumbing fixtures. It is also known as a water hammer arrestor or an angle stop. The angle stop valve is usually installed at each fixture’s incoming water supply pipe. This allows each institution to be shut off independently without affecting the others.

The angle stop valve has a cylindrical body with two ports at 90 degrees to each other. A threaded stem extends from the center of the body and is connected to a handle. When the handle is turned, the stem moves a disk-shaped plug inside the body to block or allow flow through one of the ports.

Angle stop valves are available in various materials, including brass, chrome-plated brass, and stainless steel.