Parameters of Gas Cock angle Valve

JX-0411

• Size: 1/2″X1/2″,3/4″X1/2″,3/4″X3/4″
• Brass material: 59-3
• Connection Type: Female BSP x Female BSP
• Stem Type: Blowout Proof
• Stem Material: Brass
• Seat Material: PTFE
• Body Seal Material: PTFE
• Ball Material: Chrome Plated Brass
• Valve Basic Body Material: Brass
• Surface Treatment: Nickel Plating
• Application: Water, Gas cock, appliance hook-up
• Temp: 110°C
• Working Pressure: 0-25 bar
• Port: All
• Features: Full Port for Maximum Flow Rate
• Gas cocks are shut-off ball-type valves commonly used to install residential and commercial appliances and heating equipment such as gas stoves, fireplaces, water heaters, boilers, furnaces, etc. They are compatible with natural, manufactured, liquefied petroleum gas (LPG or propane) or air mixtures of such.
• Application:
• The brass ball valve is applied to construction, electrical conduit, agricultural irrigation, industrial sewage, etc.
• Cold and hot water supply systems for civil and industrial constructions (residential buildings, hospitals, hotels, schools, office buildings, etc.)
• Drinking water systems and food industry pipe works.
• Irrigating system for gardens and greenhouses.
• Public and sports facilities such as swimming pools and stadiums.

A gas valve is an essential household item that allows you to control the flow of natural gas or propane into your home. It’s important to have a quality brass gas valve to ensure efficient and safe performance. A brass gas valve is typically more durable than other valves, and it can withstａnd high temperatures without corroding. If you’re looking for a reliable way to improve your home performance, be sure to invest in a quality brass gas valve.

When shopping for a new brass gas valve, there are a few things you’ll want to keep in mind. First, make sure the valve is compatible with your type of fuel – natural gas or propane. You’ll also need to measure the opening size of your gas pipe to ensure the valve can fit inside. It’s also important to consider what type of handle you’d like on the brass gas valve – a flat or round design. You’ll want to ensure that all operating parts are included with the new valve, including screws and gaskets.

Several factors determine how long it takes for natural gas or propane into your home. First, check if any dirt is present in your internal piping system, which could block flow circulation through the valves themselves; dirt build-up would cause them not to function correctly. Next, check if each valve has equal pressure behind it so they work equally as hard (if one fails due to low pressure, this could cause the others to work overtime). Last, check that your internal piping is not too small; it should be at least one inch in diameter. If this is smaller than an inch, then you’ll need more gas pressure, so they flow freely through them all.