Parameters of Water Mini Ball Valve

JX-0413

• Brass Mini Ball Valve
• For extra strength and corrosion resistance, the working pressure of 200 psi is a Chrome-plated brass body.
• Solid chrome-plated brass ball, Female x Male NPT
• Double – seal system allows the flow to go in either direction, heavy-duty Zinc Alloy handles
• Working temperature of 2°F to 175°F, Fast 1/4 turn open or closed operation
• Heavy Duty for Water, Oil, and Gas, each valve individually tested for maximum safety

The mini ball valve is a quarter-turn type ball valve used for shut-off application in the pipework. The handle can be rotated at 90 degrees to open or close the valve. It is a threaded end ball valve where one male thread and another female side thread.

Mini ball valves are ideal for use in small, confined spaces, where larger valves are unnecessary. They are suitable for residential and light commercial applications in domestic hot and cold water systems, natural or bottled gas, and compressed air systems.

Mini ball valves:

Mini ball valves are quarter-turn ball valves used to shut off flow in the pipework. Rotate the handle 90 degrees to open or close the valve. It’s a threaded end ball valve with male and female threads on one side. Mini ball valves are ideal for tight spaces where larger valves aren’t necessary. They’re suitable for hot, cold water, and compressed air systems in homes and small businesses.

Remember that mini ball valves are designed for use in either open or closed positions. Throttling the mini-ball valve could cause early seal failure. the inability to turn the ball valve handle, depending on the application conditions. The mini ball valve is open if the handle is parallel to the valve or pipe. When the lever is perpendicular, then it is closed.

Mini ball valves are not directional in the technical sense. You’ll notice that the guts of this unit are symmetrical if you look inside. In other words, because the ball valve is spherical, the flow direction isn’t an issue. If installing a small ball valve is required in a specific flow direction. Always make sure it has an arrow cast into the body. It depicts the flow’s path, making it simple for you to determine when necessary.

Uses of mini ball valves:

The primary function of a Mini ball valve is to control the flow of various substances such as air, water, and oil. This type of ball is commonly used to manage flow and pressure in gas distribution systems. It’s also used to reduce stress in gas storage. The primary ball valve’s job is to direct, guide, control, and adjust the flow of various media in a nutshell. As a result, you can use the device to calculate the required flow rate or volume for your project. It does so by obliterating some or all the passages.

Mini ball valves work in many industrial and home settings. It should play an important role in improving the efficiency of many applications. Some of the industries that are using these valves are below.

• Petroleum refining industry

• Marine industry

• Irrigation sector

• Gas distribution

• Brewing sector

• Industrial, commercial and residential plumbing

• Water treatment industry

• Transport industry

• Chemical process industry