Aluminum Alloy Low-pressure Casting Parts guide wheel ZL101

Aluminum Alloy Low-pressure Casting Parts guide wheel ZL101, it is an customized part applied to transmission system, the technology for this part is Low-Pressure Casting,the difficulty for this part is the wall thickness, it is very big.From the part, we can easily find that the parts have a lot of features of big cavities, so the part will have big potential risk of mold release problem, if so, the part may happen to be deform, sticking to the mold etc, especially when the part sticking to the mold, if no clear in time, while next shot, the mold may be destroyed while clamping.

The material for this storage system is ZL101, a kind of material having good fluidity and mechanical property, perform well in casting. the material is usually applied to auto part, storage part,transformation part,etc. The chemical composition is: (Cu) ≤0.2,(Si) 6.5~7.5, (Mg) 0.25~0.45, (Zn)≤0.05,(Fe)≤0.9,(Mn)≤0.35,(Zn) ≤0.3,(Sn) ≤0.1,(Ti+Zr) ≤0.25 ,(Be) ≤0.1,(Sn) ≤0.01,(Pb) ≤0.05, (Al) the remainder.

The pressure on the surface of the molten metal is 0.06~0.12Mpa.This processing has good shrinkage, casting tissue is dense, easy to produce the large thin-walled complex parts, the casting head is not needed , metal yield can be up to 95%.

Material: ZL101
Cavity Number: 1
Process Technology: Low-pressure Casting Parts
Product Dimensions: Customized
Casting General Tolerance: GBT6414-CT8
Surface Finish: shot blasting
Flow Processes: Low-pressure Casting,Degating,Trimming, Deburring,T6,CNC Milling, Cleaning, Packing, Shipping
Control Measure: Incoming Material Test, First Article inspection, Routing inspection, Final item inspection, and Outgoing quality control
Inspection Equipment: CMM, Caliper, Plug Gage
Application: transmission system
Certificate: IATF16949:2016,ISO14001:2015,ISO45001:2018
Lead Time: 30-35 days
Trade Term: FOB Ningbo