The Dexamethasone/Prednisolone & Flunixin Rapid Test Kit is a lateral flow assay that determines a qualitative level for the presence of dexamethasone/prednisolone and flunixin antibiotic residues in raw cow’s milk. This test is designed for on-site rapid detection or daily control in laboratories.
Dexamethasone/Prednisolone and Flunixin Metabolite
Rapid Test Kit
Glucocorticoids can promote the metabolism of three major nutrients and prevent protein synthesis. Hormone drugs are generally not recommended. They will cause different damage to the human body, especially to the organs native to hormones.
Experimental Preparation:
Restore the sample and kit to room temperature.
Operation steps:
1. Open the reagent barrel and take out the required number of micropores. Put the rest back into the reagent barrel and cover it well to avoid the reagent in the reagent barrel getting damp.
2. Mix the sample evenly and suck 200 μ L in micropores, blow and mix evenly for 5 ~ 10 times, and incubate at 40 ℃ for 3min.
3. Take out the required number of test strips, cover the reagent barrel cover, and then mark one end of the absorbent paper of the test strip.
4. Insert one end of the sample pad of the test strip into the micropore, react at 40 ℃ for 5min, interpret the results according to the schematic diagram, and the interpretation at other times is invalid.
Precautions:
1. Do not mix different batches of test strips and micropores.
2. It is recommended to wear clean disposable gloves for operation.
3. Retest the positive test results.
4. The reagent barrel shall be used up within 1 week after opening, and the unused reagent shall be stored at 2 ~ 8 ℃.
5. This product is only used for preliminary screening.
Analyte | Dexamethasone/Prednisolone & Flunixin |
Sample Type | Raw cow’s milk |
Methodology | Lateral flow immunochromatographic assay |
Limit of detection | Dexamethasone: 0.2-0.3 ppb |
Prednisolone: 6-8 ppb |
Flunixin: 3-5 ppb |
Packaging | 96 Tests |
Storage | Storage: The kits should be stored at a dry place away from the sunlight and the storage temperature is 2-8˚C. DO NOT FREEZE! |
Shelf life | The validity for this kit is 12 months |
Provided Materials and Reagent:
1.Test strips: 12x8 strips (96 strips total)
2.Microwells: 12x8 wells (96 wells total)
3.Positive control: 1 (Dexamethasone: 0.2-0.3 ppb, Prednisolone: 6-8 ppb, Flunixin: 3-5 ppb)
4.Negative control: 1
5.Pipette tips: 100/kit
6.Pipette:1
7.Microwell holder: 1
Materials Required But Not Provided:
1.Micropipette
2.Timer
3.Incubator
4.Reader (optional)