LACTOSCAN TCH is very simple to use thermostatic device for incubation of BetaStar® Rapid Test and BetaStar® combo Rapid Test. The users only have to choose the desired incubation mode.
Lactoscan TCH Thermostatic Devices
Dry incubator / Block heater compatible with Charm Cow Side II test for detection of antibiotic residues in raw milk;
User-friendly: simple in operation, setting, maintenance and installation;
Two factory set working modes;
Portable and compact design;
Low power consumption;
One year full warranty.
For safe and dependable operation of this thermostatic device, please comply with the following safety precautions:
Verify that the input voltage printed on the AC Adapter and the plug type matches the local AC power supply.
Make sure that the power cord does not pose a potential obstacle or tripping hazard.
Place the incubator on a firm and lever surface.
Disconnect the thermostatic device from the power supply when cleaning it.
Follow the instructions in this manual when operating with the thermostatic device.
Service should be performed by authorized personnel only.
Model | Lactoscan TCH |
Number of wells | 18 |
Ambient air temperature | to be 5°C below the desired set temperature |
Operating temperature range | -15°C– 40°C |
Relative humidity | 30% – 80% |
AC Power Supply voltage | 220V/110V |
DC Power Supply voltage | 12V to 24V |
Power Consumption | 25W (12V), 100W (24V) until the necessary temperature is reached, after that it is 1/10th |
Dimensions (W x D x H) | 90x157x59mm |
Weight | <0,8kg |
Cover box material | Stainless steel |