Ultrafine powder spray drier
1. features of equipment:
- Airflow atomization spray, small angle, no wall;
- Drying to achieve 1-8 micron small particle size powder;
- The particle size is relatively normal and the grains are relatively uniform.
- Adjustable particle size
- Wider application scope
- The whole atomizing mechanism has no plastic gaskets, no motor, long service life and easy maintenance.
- It can be upgraded to fine steel stone coating atomization mechanism, and can use all kinds of metal materials.
- The atomization mechanism is easy to be disassembled and cleaned and easy to maintain
2. Equipment advantage
- The atomization structure adopts the innovative air atomization structure, the air atomization structure adopts the double hole deviation mechanism to realize the two stage atomization mode, the droplet uniformity is good, the particle size can be adjusted according to the two-dimensional curve diagram of the QFN-CX-NZY8-075VER2018-1A atomization system, and the corresponding parameters can be adjusted.
- The spray nozzle of the atomization system is coated with diamond, which is more wearable than the ordinary SUS304 material. The service life is more than 10 times as high as SUS304.
- It can be upgraded to low temperature spray dryer (with Jo Maple's low temperature drying system QFN-CX-5-MD10), and spray drying is achieved at a minimum of 35 degrees Celsius. It is of great significance for the research and development of new materials. It can achieve spray drying of materials in a large interval of 35-280 degrees Celsius. A high and low temperature spray dryer can be realized. It is different from the high temperature spray dryer with a general temperature of 180-280 degrees Celsius.
- Granularity detection (data from customers):
Two dimensional graph of 4.QFN-PWCX-NZY8VER2018-075A atomization system
Line graph reading
1 is the spray amount of a nozzle (l/hr)
2 the red line represents compressed air PA (MPA), the blue line represents the liquid pressure, PW (MPA), and the green line represents the QA/QW vapor / water ratio.
3. the number in the figure shows that the two-dimensional curve of 4.QFN-PWCX-NZY8VER2018-075A type atomization system is determined by
Line graph reading
1 is the spray amount of a nozzle (l/hr)
2 the red line represents compressed air PA (MPA), the blue line represents the liquid pressure, PW (MPA), and the green line represents the QA/QW vapor / water ratio.
3. The numbers inside represent the average particle size (micron) of SAUTER measured by the detector.
Type QFN-CX-NZY8VER2018-075A atomization system:
For example, if the final average dry powder particle diameter is about 3 microns, the known condition is that the solid content of the feed solution is 10%.
The required average wet droplet size is 3/0.1=30 microns. The liquid intake is about 8L/hr, compressed air needs 0.2MPA, and the intersection point is about 30 microns.
If need other size diameter of droplets, first determine the amount of processing, a vertical axis, find the approximate size, and then find the point of intersection, find the pressure of compressed air.
Note: according to the density of material, viscosity and other parameters, the average diameter of droplet should be 30 + 3, [-27,33], 3.
5.Equipment configuration
system | number | parts | brand | Model | Number | Remarks |
electric control system Series | One | Electronic control system of QFN-CX series atomizing dryer | Maple Maple | / | 1 sets | See device parameters |
Two | Switching Mode Power Supply | The Ming and Wei | you - 100 - 24 | The 1 | / |
Three | Air switch | chint | DZ47 series | Some | / |
Four | Small relay | chint | JZX-22F (D) /2Z | Some | / |
JZX-22F (D) /4Z |
Five | Solid state relay | Meg | / | 1 sets | / |
Six | Frequency converter | Taida | / | 1 sets | 2.2kw |
Seven | Digital controller | Taida | DTC-1000 series | Some | / |
Eight | Power switch | | | The 1 | |
Nine | Indicator light | chint | nd16 - 22ds / 4 | The 1 | Red, 220VAC |
Ten | sensor | Famous Shanghai | wzp - 241 | 3 roots | / |
Eleven | Terminal terminal | / | / | Some | / |
Twelve | Guide | / | / | Some | / |
Thirteen | Groove | / | / | Some | Bottom hole |
Fourteen | wire | Sails | / | / | / |
Fifteen | Electric box | Maple Maple | Customized | The 1 | sus304 |
transport material system Series | One | Peristaltic pump | Hui Yu | yz15 13a | 1 sets | / |
Two | Feed pipe | / | | / | / |
Fog turn system Series | One | Atomization system | Maple Maple | Customized | 1 sets | See device parameters |
Two | Pressure gauge | AirTAC | 0-1MPA | | / |
Three | Circulating pump | / | / | One | / |
Three | Air compressor | Dolphin | 0-0.8MPA | 1 sets | / |
dry dryness system Series | One | Dry pagoda | Maple Maple | / | The 1 | See device parameters |
Two | Hot air distributor and volute (matching of atomization system) | Maple Maple | Customized | The 1 | Three hundred and four |
yield product return collect system Series | One | cyclone | Maple Maple | Customized | One | Three hundred and four |
Two | Dust collector (optional) | Maple Maple | Customized | / | See device parameters |
Three | Collecting bucket | Maple Maple | Customized | Three | Three hundred and four |
Four | Feed valve | Warm letter | φ63 / 108mm | Three | Health level 304 |
Hot air circulation system | One | Fan | / | / | 1 sets | See device parameters |
Two | heater | Maple Maple | Customized | | See device parameters |
6.Equipment parameters
Ultrafine powder spray dryer | qfn -CX-3 | qfn -CX-Five | qfn -CX-Ten |
Water evaporation | 3Kg/h | 5Kg/h | 10Kg/h |
Minimum feed volume | 80ml | 80ml | 120ml |
The diameter of the drying chamber (mm) | ¢600 | ¢800 | ¢1200 |
Height of dry tower (mm) | ¢800 | ¢800 | ¢1500 |
Atomization structure | Single hole eccentric atomizing structure (QFN-CX-NZY8VER2018-1A) |
Electronic control system | Jo Feng superfine powder atomization system only (QFN-CX-ES-VER2018-1A) |
Maximum inlet temperature (centigrade) | Two hundred and sixty |
Standard of main electrical accessories (including PLC, analog module, touch screen) (optional) | Control module (standard), delta control module, SIEMENS control module, Germany. On the other hand |
Standard of electrical auxiliary accessories selection (including Contactors) (optional) | CHINT (standard): Deli, Schneider. |
Contact with the material (optional) | ☑sus304 (标准) □sus316 □其他 _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ |
Exhaust reutilization, energy saving over 30% (optional) | Assembly (standard) / assembly |
Atomizing nozzle (using diamond coating) | (SUS304) (standard) SUS316 (standard) silicon carbide (standard) diamond |
Equipment warranty | 1 years (standard, above must be charged a certain maintenance cost) for 2 years, 3 years. |
Heater capacity | 6kw | 15kw | 25kw |
Air blower [power (kw), air volume (m /min)] | nothing | nothing | [0.25,9.5] |
Draft fan [power (kw), air volume (m /h)] | [1.5,250] | [2.2,300] | [2.2,300] |
Compressor [power (kw), air volume (L /min)] | [0.58,108] | [1.5,250] | [1.5,250] |
Electric power (installed capacity) | 8kw | 30kw | 40kw |
Thermal insulation material | 50mm glass fiber insulated cotton | 50mm glass fiber insulated cotton | 50mm glass fiber insulated cotton |
Pulse bag dust collector (optional) | Polytetrafluoroethylene film mulching material |
4 | 4 | 9 |
Shape size (mm) (L x W x H) Reference resources | 1600×1400×1800 | 2200×1600×2200 | 2600×1200×2500 |
Installation weight (Reference) | 500 pounds | 450kg | 1000kg |
Power supply | 380V/-3: it can be customized according to different national standards. |
Note 1: water evaporation at inlet temperature of 250 C.
2: for more evaporation equipment, please inquire online or call our company.