Overview
A lifting electromagnet spreader is installed on the front side for lifting and tying materials such as steel bars and billets; A derrick type hanging beam is designed below the front-end container sp
Product Details
Operating conditions
1. It is used for front lifting with lifting electromagnet spreader to suck and sling materials such as rebar, round steel, billet and plate circle.
Material size:
Disc circle: 1.5m in length, 1.3m in diameter, 2 tons in weight per reel, 3 rolls can be sucked and lifted each time.
Bale reinforcement: 6-9-12m in length, 200-350mm in diameter, single bale weight: 2-3 tons, 4-7 bundles can be sucked up each time.
Steel billet: length 6-12 meters, 150*150mm, single weight: 1-2 tons, 9 pieces can be drawn and lifted each time.
2. Front lifting: 45T, 20-foot container hanger.
3. Work place: cargo handling in yard, dock/train and semi-trailer.
4. Lifting electromagnet spreader group is composed of lifting electromagnet, hanger and control system. The control system includes main control cabinet, standby battery group, transformer, silent diesel generator set, monitor, etc., and the control system is integrated with the hanger assembly. In order to prevent the material falling due to the power loss during the hoisting process, so as to avoid damaging the equipment and injuring the personnel, the magnetic protection control system shall be equipped with. The magnetic protection time shall be ≥30 minutes. The control system cabinet adopts the design of stainless steel IP65. All parameter data of the main control system and the battery bank are set and displayed by touch screen. The battery bank monitors the current, voltage, temperature and other states online and displays alarm protection. The main control cabinet and the battery bank adopt stainless steel IP65 special cabinet.
Lifting electromagnet excitation coil adopts oxide film and imine film coated electromagnetic wire, protection grade IP65.
A lifting electromagnet spreader is installed on the front side for lifting and tying materials such as steel bars and billets; A derrick type hanging beam is designed below the front-end container spreader. The derrick type hanging beam is provided with the same lifting hole as the container spreader above. The electromagnetic spreader group can be lifted by connecting the derrick with the front-end container spreader.
The binding diameter is 350mm, 4 bales are drawn and hoisted each time, and the width of the 4 bales is 1400mm, that is, the length of the electromagnet is 1400mm, which can also meet the requirement of lifting 9 billets. The electromagnet model is ZMW52-14011OL/1-75. According to the material length of 6-9-12m, the electromagnet group adopts the method of 4 electromagnets hanging together. 4 groups of electromagnet lifting lugs are set below the derrick hanging beam to hang 4 electromagnets. The length of the hanging beam is 8.5m, the center spacing of the 2 electromagnets is 2.5m and the left and right electromagnets are suspended by electric telescopic beams. When sucking and lifting materials with a length of 6 meters, operate the button of "shrink of telescopic beam", which can control the stretching of telescopic beam to suck and lift materials with a length of 6 meters, and the stretching of stretching beam to suck and lift materials with a length of 9-12 meters.
The control system is centrally assembled in the middle part of derrick type hanging beam, the cabinet body adopts special stainless steel cabinet, the whole control system is controlled by digital modularization, and all parameter status and Settings can be set and displayed by digital LIQUID crystal display. The four corners of the electromagnet spaller are equipped with hd cameras, which are displayed in the cab for the convenience of observing the working state of the electromagnetic spaller at the bottom of the carriage, improving the operation efficiency and ensuring safety.
When electromagnetic suction crane crane group material using power magnetic control equipment, power magnetic function in electromagnet suspended material in the process of running to the specified location, in case of power loss or main rectifier part failure, or turn off the power error and standby power automatic input immediately, to ensure the sucked material does not fall, and the magnetic effective time (30 minutes).
The battery is equipped with an online inspection and monitoring system to monitor the battery, voltage, current, internal resistance, temperature and other states. When the battery is overcharged or too high in temperature, it will give an accurate alarm and automatically disconnect the protection.