EMUX100 Series Integrated Service Optic Access Equipment is developed and produced independently by Easy Broadband Technology (Beijing) Co., Ltd with its own ASICs. The Ethernet signal and E1 signal are mixed and encoded and transmitted on a pair of optical fibers by adopting time division multiplexing technology. Thus realizing 100M Ethernet service, E1 service, telephone service, V35 service, data service, 2/4 wire mixed transmission. The transmission channel includes optical transmission channel and E1 transmiss......
1. Product Description
EMUX100 Series Integrated Service Optic Access Equipment is developed and produced independently by Easy Broadband Technology (Beijing) Co., Ltd with its own ASICs. The Ethernet signal and E1 signal are mixed and encoded and transmitted on a pair of optical fibers by adopting time division multiplexing technology. Thus realizing 100M Ethernet service, E1 service, telephone service, V35 service, data service, 2/4 wire mixed transmission. The transmission channel includes optical transmission channel and E1 transmission channel. This device adopts 19"*1U design, high integration, small size, low power consumption, reliable operation, easy to install and use.
2. Part Number
EMUX100-8S
3. Main Features
Provide 1 optical interface;
Provide 4 E1 interfaces;
Provide 4*10/100M Ethernet Interfaces, 4 Ethernet support sharing or logical isolation;
Provide 4 business slots, each slot support 4 channels business;
The business cards are: local speech channel card, remote speech channel card, hotline phone card, magnet phone card, Ethernet card, 2/4 audio card, data card (RS232 RS422 RS485), etc.
1U rack mount device;
The transmission distance is 20KM, and the longest transmission distance is 120KM.
4. Power Supply Condition
The power supply of standard equipment is configured with -48v input or 220V input. When connecting the power cord, be sure to wire according to the mark of binding post carefully; All power supply must meet the following conditions:
1).DC-48V:-36V ~-72V
2).AC 220V:220V±20%,50Hz
5. Equipment Interfaces
5.1:Optical Interface
² Wavelength:1310nm(standard mode)or 1550nm
² Transmit Power:≥-12dBm
² Receiver Sensitivity:≤-30dBm(BER≤10-11)
² Interface Type:FC(standard mode)or SC etc.
² Transmission Mode:Dual Fiber or Single Fiber
5.2:E1 Interface
² The device has 4 channels E1 interface, in accordance with G.703
² Rate:2048Kb/s ±50ppm
² Code Type:HDB3
² Impedance:75Ω(unbalanced)or 120Ω(balanced)
² Jitter:In accordance with G.742 G.823
² Attenuation: 0~6dB
5.3:Ethernet Interface
² Support line speed 10Base-T/100Base-T, Full duplex/half duplex self-adaptive
² In accordance with IEEE802.3/IEEE802.3u standard
² Use standard RJ45 connector
5.4:Data Interface(Including RS232、RS485、RS422 Interface)
² Data Interface rate is 300--19.2Kbit/s baud rate self-adaptive,DCE mode
5.5:V.35 Interface Character
l Nominal Rate:N*64K/s(N ≤32)
l Working Mode:DCE,DTE optional
5.6:Speed Channel Interface and Signaling
l Exchange Side
Off-hook Impedance: < 500Ω
On-hook Impedance: > 10KΩ
l User Side
Loop Impedance: ≤2000Ω(include phone)
Idle Circuit Voltage ≤ 50V
Loop Current: 25mA
Off-hook Threshold: 8mA
Polarity Reversal Delay: < 50ms
Dial Up: Pulse dialing single pulse distortion< 5ms
The total distortion of internal audio dialing satisfies the characteristics of voice interface
Off-hook Delay: < 100ms
l Ringing Current:
Remote(FXS)Ringing Current Generator
Frequency: 25 Hz±3 Hz
Range: 75V±5Vrms
Ringing Current Time Delay < 50ms
Total Output Power ≤ 10W(in units of chassis)
Local(FXO)Ringing Current Detection
Range: Minimum 38Vrms
l Speech Interface
Impedance: 600Ω or three-element compound impedance, as shown below:
Three-element compound impedance
Audio Range: 300-3400 Hz
Encoding Law: CCITT Suggestion G.711 A Law
5.7:2/4 Wire Audio Interface
2 Wire Interface Level:2 wire transmit 0dBr 2 wire receive -3.5dBr
4 Wire Interface Level:4 wire transmit 0dBr 4 wire receive 0dBr
Return Loss: 300-600 Hz > 12dB 600-3400 Hz > 15dB
Frequency Response: 300-3400 Hz (+0.5,-0.5dB)
Air Noise: ≤-65dBm0p
Gain: -45 dBm0——+3 dBm0(+0.5,-0.5dB)
Total S/N: In accordance with ITU G.713 The template is as shown
Analog (4-wire to 4-wire or 2-wire to 2-wire) channel signals/Total distortion in relation to input level
2/4 Wire Interface Specification:
Compression Ratio: A Law in ITU G.711
Impedance: 600Ω(Balanced)
Audio Range: 300Hz―3400Hz
Return Loss: Not less than 18Db
6:Power Consumption
² Power Consumption of the whole machine <35W
7:Work Environment
² Operating Temperature: 0~45℃
² Relative Humidity: ≤95%(25℃)
² Atmospheric Pressure: 70~106Kpa