EMUX300ESX Integrated Service Optic Access Equipment is developed and produced independently by Easy Broadband Technology (Beijing) Co., Ltd with its own ASICs. The E1 signal, Ethernet signal and telephone signal are mixed and encoded and transmitted on a pair of optical fibers by adopting time division multiplexing technology. Thus realizing 100M Ethernet service and telephone service transmission. The transmission channel includes optical transmission channel and VF transmission channel. This device adopts 19"*3U......
1:General Overview
EMUX300ESX Integrated Service Optic Access Equipment is developed and produced independently by Easy Broadband Technology (Beijing) Co., Ltd with its own ASICs. The E1 signal, Ethernet signal and telephone signal are mixed and encoded and transmitted on a pair of optical fibers by adopting time division multiplexing technology. Thus realizing 100M Ethernet service and telephone service transmission. The transmission channel includes optical transmission channel and VF transmission channel. This device adopts 19"*3U design, high integration, low power consumption, reliable operation, easy to install and use.
2:Functions and Features
1:The device is with 19"*3U structure, adopt card type;
2:Provide 3 service slots, each slot can plug 1* main card;
3:Service slots can plug 240H main card or MUX30A main card;
4:240HA main card provides 1*optical port, 4-8*E1 ports, 4*FE ports, 30 channel service slot port;
5:MUX30A main card provides 1*E1 port, 30 channel service slot port;
6:Telephone interface contains over-voltage and lightning protection module;
7:Service interface can plug VF service, data card, 2/4 line audio interface, 2/4 line EM interface, Ethernet service, hotline phone card, magnetic phone card, etc.
8:Optical interface card optical non-relay transmission distance longer than 20 km, maximum 120 km;
9:Power supply: 220V or -48V;
3:Technical indicators
1:Optical Interface
² Wavelength:1310nm(standard mode)or 1550nm
² Transmit Power:≥-12dBm
² Receiver Sensitivity:≤-30dBm(BER≤10-11)
² Interface Type:FC(standard mode)or SC etc.
Transmission Mode:Dual Fiber or Single Fiber
2:Ethernet Interface
² Support line speed 10Base-T/100Base-T, Full duplex/half duplex self-adaptive
² In accordance with IEEE802.3/IEEE802.3u standard
² Use standard RJ45 connector
3:VF Interface and Signaling
l Exchange Side
Off-hook Impedance: < 500Ω
On-hook Impedance: > 10KΩ
l User Side
Loop Impedance: ≤2000Ω(include phone)
Idle Circuit Voltage ≤ 50V
Loop Current: 25mA
Off-hook Threshold: 8mA
Polarity Reversal Delay: < 50ms
Dial Up: Pulse dialing single pulse distortion< 5ms
The total distortion of internal audio dialing satisfies the characteristics of voice interface
Off-hook Delay: < 100ms
l Ringing Current:
Remote(FXS)Ringing Current Generator
Frequency: 25 Hz±3 Hz
Range: 75V±5Vrms
Ringing Current Time Delay < 50ms
Total Output Power ≤ 10W(in units of chassis)
Local(FXO)Ringing Current Detection
Range: Minimum 38Vrms
l VF Interface
Impedance: 600Ω or three-element compound impedance
4:Power Consumption
² Power Consumption of the whole machine <120W(fully equipped)
5:Work Environment
² Operating Temperature: 0~45℃
² Relative Humidity: ≤95%(25℃)
Atmospheric Pressure: 70~106Kpa