EMUX200ESX Integrated Service Optic Access Equipment is developed and produced independently by Easy Broadband Technology (Beijing) Co., Ltd with its own ASICs. The Ethernet signal and telephone signal are mixed and encoded and transmitted on a pair of optical fibers by adopting time division multiplexing technology. Thus realizing telephone service transmission. The transmission channel includes optical transmission channel and VF transmission channel. This device adopts 19"*2U design, high integration, low power ......
1:General Overview
EMUX200ESX Integrated Service Optic Access Equipment is developed and produced independently by Easy Broadband Technology (Beijing) Co., Ltd with its own ASICs. The Ethernet signal and telephone signal are mixed and encoded and transmitted on a pair of optical fibers by adopting time division multiplexing technology. Thus realizing telephone service transmission. The transmission channel includes optical transmission channel and VF transmission channel. This device adopts 19"*2U design, high integration, low power consumption, reliable operation, easy to install and use.
2:Functions and Features
1:Provide 1 channel optic port;
2:Provide 64 channels telephone;
3:Telephone interface contains over-voltage and lightning protection module;
4:Power supply: 220V or -48V;
5: Single fiber or dual fiber transmission, the transmission distance is 20 km, maximum 120 km;
6: The device is with 19"*2U structure, rack mount.
3:Technical indicators
1:Optical Interface
² Wavelength:1310nm(standard mode)or 1550nm
² Transmit Power:≥-12dBm
² Receiver Sensitivity:≤-30dBm(BER≤10-11)
² Interface Type:FC(standard mode)or SC etc.
² Transmission Mode:Dual Fiber or Single Fiber
2:VF Interface and Signaling
l Exchange Side
Off-hook Impedance: < 500Ω
On-hook Impedance: > 10KΩ
l User Side
Loop Impedance: ≤2000Ω(include phone)
Idle Circuit Voltage ≤ 50V
Loop Current: 25mA
Off-hook Threshold: 8mA
Polarity Reversal Delay: < 50ms
Dial Up: Pulse dialing single pulse distortion< 5ms
The total distortion of internal audio dialing satisfies the characteristics of voice interface
Off-hook Delay: < 100ms
l Ringing Current:
Remote(FXS)Ringing Current Generator
Frequency: 25 Hz±3 Hz
Range: 75V±5Vrms
Ringing Current Time Delay < 50ms
Total Output Power ≤ 10W(in units of chassis)
Local(FXO)Ringing Current Detection
Range: Minimum 38Vrms
l VF Interface
Impedance: 600Ω or three-element compound impedance
3:Power Consumption
² Power Consumption of the whole machine <90W
4:Work Environment
² Operating Temperature: 0~45℃
² Relative Humidity: ≤95%(25℃)
Atmospheric Pressure: 70~106Kpa