Welcome Customer !

Membership

JIANGSU TUOCHUANG SCIENTIFIC RESEARCH INSTRUMENTS CO., LTD.
Free Member ·1YRS
,
Other

Main Products: 科研仪器设备

Xwboo>Products
Product Categories

JIANGSU TUOCHUANG SCIENTIFIC RESEARCH INSTRUMENTS CO., LTD.Free·1YRS

  • E-mail

    jstc08@126.com

  • Phone

    0513-81855588

  • Address

    No. 8, hengkun road, high-tech zone, hai'an county, jiangsu province

Contact Now

Three-dimensional Core Module of High Temperature and High Pressure Triaxial Rock Comprehensive T...

Model
Nature of the Manufacturer
Other
Product Category
Place of Origin
City, Province
Overview
Three-dimensional Core Module of High Temperature and High Pressure Triaxial Rock Comprehensive Testing System
Product Details
IntroductionHydraulic   fracturing is a widely used oil well production measure, hydraulic fracturing   is the main form of natural gas extraction, requiring a large amount of water   mixed with chemicals into shale formations for hydraulic fracturing to   release natural gas.    
   
Hydraulic fracturing uses a low-pressure pump at the bottom to squeeze   high-viscosity fracturing fluid into the oil layer through a wellhead. When   the infusion of fracking fluid exceeds the absorption capacity of the oil   layer, a high pressure is formed on the bottom of the well, and when this   pressure exceeds the pressure of the rupture of the rock in the oil layer   near the bottom of the well, the oil layer is pressed open and cracks are caused.   At this point, the fracking fluid continues to be squeezed into the oil layer   and the crack continues to expand inside the oil layer. In order to keep the   pressed crack open, then squeeze the sand-carrying liquid with a supporting   agent (usually quartz sand) into the oil layer, carrying the sand into the   crack, on the one hand, the crack can continue to extend forward, on the   other hand, it can not be closed. After the injection of replacement fluid,   the wellbore of the sand-carrying liquid all replaced into the crack, with   quartz sand to support the crack. Finally, the injected high-viscosity   fracking fluid automatically degrades out of the wellhead, leaving one or   more cracks in the oil layer, varying in length, width and height, so that a   new fluid channel is established between the oil layer and the wellhead.   After fracking, oil and gas well production will increase   significantly.
   
ParameterNo.ItemUnitParameter
1Applicable Core Specificationsmm300×300×300
2Three-axis hydraulic PressureMpa50
3Temperature Control PrecisionMpa±0.1
4Heating Temperature℃150