Welcome Customer !

Membership

Xiamen Qiangli Jucai Opto-electronic Technoloy Co., Ltd.
Free Member ·1YRS
Other

Main Products: LED显示屏

Xwboo>Products

Xiamen Qiangli Jucai Opto-electronic Technoloy Co., Ltd.Free·1YRS

  • E-mail

    sales@qiangliled.com

  • Phone

  • Address

    No.8065, E6, West Xiang’an Road, Xiang’an High-tech Torch Zone, Xiamen, China

Contact Now

Outdoor P2.5 High Refresh Rate LED Display Module

Model
Nature of the Manufacturer
Other
Product Category
Q-Pro
Place of Origin
City, Province
Overview
Main SpecificationPixel Pitch: 2.5mmModule Size: 320*160 mmResolution: 128*64dotsLED: SMD1515Brightness: ≥4500nitsMax Current: ≤7.37 APixel Density: 160000dots/㎡Refresh Rate: ≥3840HzPort: HUB75E
Product Details

Remarks & Key Precautions

1.Outdoor Q2.5 Pro is relative small pixel, we suggest to go with 960*960 outdoor MG cabinet.
2.All outdoor Q-Pro modules use HUB75
3.Temperature requirement:

  • 1) Operating temperature range: -20 ° C -40 ° C, other temperature range, need to install temperature control equipment.
  • 2) Lamp surface temperature (working time): ≤85°C, temperature control equipment is required to be installed when temperature exceeding the standard

4.Metal components of the screen, the shell of power supply and the cabinet should be grounded well, and the grounding resistance should be less than 10Ω. Prevent electrostatic damage to electronic devices in humid environment, while avoiding electric leakage to harm human body.
5.It’s not recommended that customer install module in outdoor environment with magnetic method. For it will cause the following hazards:

  • Rain or snow can enter from the screen front side to the screen back side, it may cause the electronic components, system card, power supply and cables be corroded and lose efficacy.
  • The magnetic installation method cannot guarantee the flatness and the performance of the LED screen.
  • Module is likely to deform under extremely cold weather.

6.Metal components of the screen, the shell of power supply and the cabinet should be grounded well, and the grounding resistance should be less than 10Ω. Prevent electrostatic damage to electronic devices in humid environment, while avoiding electric leakage to harm human being.
7.Temperature and humidity meters should be equipped on the installation site to monitor the surrounding environment of the screen in time. After heavy rain, it is necessary to check whether there are any problems such as dampness, water droplets and over humidity in the screen in time.
8.Temperature and humidity meters should be equipped on the installation site to monitor the surrounding environment of the screen in time.
9.Each group of 220V power line (2.5mm2 copper wire) into the line is only allowed to carry a maximum of 3 boxes, and each group of network connection line into the line according to the actual configuration of the system card parameters.

Application

Q2.5 Pro, Company Sign, 25sqm

Q2.5 Pro, Company Sign, 25sqm

Q2.5 Pro, Taxation Administration, 4.6sqm

Q2.5 Pro, Taxation Administration, 4.6sqm