，-
E-mail
sales@qiangliled.com
- Phone
-
Address
No.8065, E6, West Xiang’an Road, Xiang’an High-tech Torch Zone, Xiamen, China
Product Categories
Xiamen Qiangli Jucai Opto-electronic Technoloy Co., Ltd.Free·1YRS
Indoor P3.0 High Refresh Rate LED Display Module
NegotiableUpdate on October 24
- Model
- Nature of the Manufacturer
- Other
- Product Category
- Q-Pro
- Place of Origin
- City, Province
Overview
Main SpecificationPixel Pitch: 3.0 mmModule Size: 320*160 mmResolution: 104*52 dotsLED: SMD2020Brightness: ≥600 nitsMax Current: ≤4.7 APixel Density: 105625 dots/㎡Refresh Rate: ≥3840 HzPort: HUB75E
Product Details
Remarks & Key Precautions
1.Indoor Q3.0 Pro can go with 640*480mm MG cabinet, suggestion cabinet model is QM-Pro-2.
2.Indoor Q3.0 Pro uses HUB75E.
3.Temperature requirement:
1) Storage temperature range: -10℃-30℃, over 30℃ needs to do cooling treatment. Lamp surface temperature(working period): ≤60℃, temperature control equipment is required to be installed when temperature exceeding the standard.
4.Humidity requirement:
- Storage humidity range: 10% RH-60% RH, humidity over 60% RH requires dehumidification treatment.
5.Keep away from water: Indoor products have low level of protection, water can make the module short circuit, and leads to circuit device damage, so it is necessary to keep away from the water source.
6.Corrosive gas contains salt or acid gas in the environment, may cause corrosion of electronic components, crystallization, leakage and so on.
7.when hoisting and installing the box, the height of the box shall be ≤15 to ensure the safety of load-bearing structural parts
8.Each group of 220V power cord (2.5mm2 copper wire) is allowed to load up to 9 cabinets,the incoming load of each group of network cables should be determined according to the system card parameters actually configured on the screen.
Application
Q3.0 Pro, Hospital, 44sqm
Similar Product Recommend
