Characteristics:
| ◆Floating installation to provide full protection | |
| ◆Class 1 laser source, can detect dia.4mm object and vibration deviation allowed | |
| ◆Double safety outputs, redundancy circuit design | |
| ◆EDM function, can monitor dual valve | |
| ◆Miniaturization and remarkable scale, simple mounting | |
| ◆Can save alignment time with the auxiliary device | |
| ◆Simple adjustment with the dimming mode | |
| ◆Three operating modes: “flat bending mode",“box bending mode",“special mode",can process workpiece into different shapes | |
| ◆Fast speed close allowed to have the max. productivity | |
◆Comply with EN 61496-1/-2 (Type 4),EN ISO 13849 (Cat.4 PL e) | |
Parameters:
| Safety level | PL e EN ISO 13849-1 |
| Protection category | III |
| Light source | class 1 laser 635nm |
| Resolution | ≤1.5mrad |
| Input Voltage | DC24V ±10% |
| Power consumption | <5W |
| Protection range | 0~5000mm |
| Response time | <5ms |
| Safety output | PNP*2,cross check, short protection |
| ON:(loading current)≤120mA |
| OFF:(current lose)≤1mA,(remain volt)≤1V |
| Sealing level | IP65 |
| Environment | EN 60068-2-78 |
| Operation temperature | -10~+50℃ |
| Storage temperature | -40~+85℃ |
| Anti-light interference | 10000Lux (angle of incidence ≥5°) |
| Anti-vibration | frequency:10-55Hz,amplitude:0.35mm |
| Anti-impulse | 15g,16ms,1000 times at X,Y,Z axis |
| Standards | EN 61496-1 |
| EN 61496-2 |
| EN 60529 |
| EN ISO 13849-1 |
| EN 60825-1 |
| GB 7247.1 |
| GB 28243 |
1- Position block
2- Fastening handle
3- Adjustable handle
4,5- Adjustable screw