Welcome Customer !

Membership

Sinomeasure Automation Technology Co,Ltd
Free Member ·1YRS
,
Other

Main Products: 流量仪表

Xwboo>Products
Product Categories

Sinomeasure Automation Technology Co,LtdFree·1YRS

  • E-mail

    sales01 @sinomeasure.com

  • Phone

    +86-18757554945

  • Address

    5th floor, Building 4, Singapore-Hangzhou Science & Technology Park, Hangzhou, China

Contact Now

SIN-PH6.0 pH meter

Model
Nature of the Manufacturer
Other
Product Category
Place of Origin
City, Province
Overview
Category: pH meter Views: 5412 Applications: Bio-pharmaceutical, Farming,Sea-culture,Freshwater aquaculture. Municipal sewage, industrial wastewater, surface water
Product Details


Characteristics:

* 2.8 inches 128*64 lattice screen.
* Isolating transmitting output, with little interference.
* Isolating RS485 communication.
* Can be PH / ORP measurement, temperature measurement, upper and lower limit control, transmission output, RS485 communication.
* Configurable manual and auto temperature offset function.
* Configurable upper/lower limit warning and delay.
* Configurable hummer and LCD backlight switch.
* Addition of universal password.

* Industrial controlled door keep, to avoid instrument halted.


pH & ORP controller for hydroponic:

Hydroponic systems could better diagnose problems and better understand the evolution of their hydroponic crops. Automating measuring instruments are not only having sensors that can take readings at predefined intervals but also making sure that the reading from these sensors are stored so that they can be used for analysis and diagnosis later on.

It provides reliable dosing when required to maintain a constant pH level in a hydroponic system. And alarm function and relay to keep the requirement value.

If you want to perform automated monitoring then you would definitely want to buy pH, ORP, ambient temperature, solution temperature, humidity and carbon dioxide sensors. We can also provide other instruments to you.



pH & ORP controller for water treatment:

Wastewater treatment often consists of removing heavy metals and/or organic compounds from effluent streams. pH adjustment by addition of acidic/basic chemicals.

At an acidic pH the excess of positive hydrogen and metal ions have nothing to bond with and float around in the water, never settling. At a neutral pH the hydrogen ions are bonded with the hydroxide ions to form water while the metal ions remain. At a basic pH the excess hydroxide ions bond with the metal ions to form metal hydroxides which can be removed through filtering or settling. In addation the pH of water can be used to kill off bacteria in wastewater.



Button Name
Function description
EXIT
Check related warning status on the “monitoring page"
Return to previous level page in the up& down level page linked to “menu page"
MOVE RIGHT
Make a recurrent selection of digit of parameters
Remove the original indication value in the “conductivity calibration page"
MENU
Enter the MENU on the “monitoring page"
Exit the MENU on the “menu page"
MOVE DOWN
Select the related menu on the “menu page"
Modify the values in the configuration state
ENTER
Enter the sub-menu or confirm modification on the “menu page"



Product Name:
Industry online pH/ORP controller
Measure range:
0-14 (pH), ±0.02pH
-1000~1000mv (ORP), ±1mv
Others can be customized
Resolution:
0.01pH,1mv
Stability:
≤0.02pH/24H,≤3mv/24H
Input Resistance:
≥10~12Ω
Temperature range:
-20~130℃, NTC10K
Temp Compensation:
Manual / Auto temperature compensation
Communication:
RS485, standard Modbus
Signal output:
4-20mA output, Maximum loop 750Ω, 0.2%FS
Power supply:
220V±10%,50Hz/60Hz
Relay out:
250VAC, 3A




Industry online pH meter controller


Install a 92.5 * 92.5 mounting hole on the instrument cabinet or mounting panel

The instrument into the mounting hole and then buckle on the butterfly, as shown below:



Installation of ph electrode


Schematic diagram of common installation method

①Side wall installation ②Flange mounted at the top ③Pipe installation ④Top installation ⑤Submersible installation ⑥Flow-through installation
The interface must be in 15°oblique angle, or it will affect the normal test and use of the electrode. We won’t

be responsible for any results due to this.