Welcome Customer !

Membership

Sinomeasure Automation Technology Co,Ltd
Free Member ·1YRS
,
Other

Main Products: 流量仪表

Xwboo>Products
Product Categories

Sinomeasure Automation Technology Co,LtdFree·1YRS

  • E-mail

    sales01 @sinomeasure.com

  • Phone

    +86-18757554945

  • Address

    5th floor, Building 4, Singapore-Hangzhou Science & Technology Park, Hangzhou, China

Contact Now

SIN-PH-5014 pH sensor

Model
Nature of the Manufacturer
Other
Product Category
Place of Origin
City, Province
Overview
Category: pH sensor Views: 802 Applications: PH-5014 sensor is made of pH sensitive glass film resistant to hydrofluoric acid.The application of this sensor is not only for the determination of pH value in water containing hydrofluoric acid, but also in the dilution control of hydrofluoric acid in semiconductor wafer manufacturing and chip production.It can also be used in the petrochemical industry, iron and steel waste water and other corrosive systems in the determ......
Product Details

The SIN-PH-5014 ph sensor (Ph electrode) consists of a pressure-resistant hemispherical pH-sensitive membrane, an intermediate dielectric composed of complex gum GMT, an Ag/AgCL/KCL external reference system, and an OPEN liquid junction without salt bridge, which is widely used in pure water and high purity water as well as complex chemical processes.


Product parameter


· Measurement range: 0 to 14 pH

· Temperature: 0 to 130 ℃

· Pressure: 0.4MPa

· Temperature compensation: NTC10K/PT100/PT1000

· Hydrofluoric acid concentration range: ≤4000ppm

· Conversion coefficient: > 98%

· Membrane resistance: <250ΜΩ

· Connector: VP,S8M,K2, etc.


Typical applications


· Microbial technology

· Pharmaceuticals

· Food and beverages

· Chlor-alkali

· Mining and smelting


Product highlights


· Water with less impurities

· PH value between 6-7 ph

· The temperature between 0-130℃




Installation of ph electrode



Schematic diagram of common installation method

①Side wall installation ②Flange mounted at the top ③Pipe installation ④Top installation ⑤Submersible installation ⑥Flow-through installation
The interface must be in 15°oblique angle, or it will affect the normal test and use of the electrode. We won’t

be responsible for any results due to this.